The decline in the production of once-burned bricks has shrunk the market for low-quality feldspar . Therefore, feldspar production enterprises face difficulties in improving product quality and increasing product profit. The paper describes the issue of increasing the value of raw materials that are currently being sold at low profit or as scrap. Three different examples were studied. The results of the experimental study show that the use of magnetic separation, surface scrubbing and selective flotation beneficiation technology can obtain concentrates with higher added value and easier to sell. The treatment process is usually a combination of the above-mentioned beneficiation methods. The higher the quality requirements of the final product, the more complicated the process and the higher the processing cost.
1. Concrete Spun Pile Mould:
Concrete Spun Pile Mould is a kind of steel mould, it is mainly apply to Concrete Spun Pile Plant to produce the Centrifugal Reinforced Technology (PHC ) Concrete Spun Pile, In order to meet customer's requirement to produce high strength PHC concrete pile, Jiangsu Haiheng Company have long term cooperation relationship with Japan spun pile factories for improve the design and technology of mould and use advanced processing equipment, HH's spun pile mould has got the leader market share in the countries like Japan, Vietnam, Indonesia, Malaysia, Thailand, Myanmar, Cambodia etc.
Our Mould Advantages:
1. Mould's tongue-and-groove is designed by the dislocation of upper and lower shell boards, matchboard is plane surface. Slurry does not leak and it is easy to clean mould.
2. The tyre is "T" type forgings. Tyre and its support plate are as whole.
3. Self-developed six-meter press machine of mould inside shell. The inside shell seam extends from two meters to six meters, to minimize welds and mould strength and improve the external appearance of the products
4. Welding process uses CO2 arc shield weld which makes its appearance simple and weld seam neat. Our company cooperated with colleges to introduce [robot welding project".
5. Long lathe, manufacture the whole set mould under fifteen-meter length, greatly increases concentricity of the tyre and flange.
Spun pile Mould Specification:
|
Inside diameter(mm) |
Wheel base(mm) |
Wheel Diameter(mm) |
Length(mm) |
|
Ø300 |
2000 |
510 |
7-11 |
|
Ø350 |
2000 |
610 |
7-11 |
|
Ø400 |
2000 |
610 |
7-12 |
|
Ø450 |
2000 |
710 |
7-12 |
|
Ø500 |
2000 |
710 |
7-12 |
|
Ø550 |
2000 |
810 |
7-12 |
|
Ø600 |
2000 |
810 |
7-15 |
|
Ø800 |
2000 |
1010 |
7-15 |
|
Ø1000 |
2000 |
1210 |
7-15 |
If you have any questions, please contact with us directly. Concrete Pile Moulds are produced by High Quality and Esay transportation, quick assembling, good rigidity and smooth working. Welcome you can visit our Factory.For inqury,Please send mail directly to us.
Concrete Spun Pile,Reinforced Concrete Spun Pile Mould,Phc Spun Pile Mould,Pretensioned Concrete Spun Pile Mould
Jiangsu Haiheng Building-Materials Machinery Co.,Ltd , https://www.jshaiheng.com