On June 7, a collision between a tanker and a truck occurred on a highway. Among them, the tanker body was broken and the gasoline in the tank flowed out. The freight driver suffered heavy losses.
Video link: Tanker was broken
In recent years, there have been many cases where drivers have suffered huge losses due to poor quality of tank trucks. In the final analysis, on the one hand, the owner of the vehicle is simply trying to buy a vehicle, but he is not willing to consider the quality of the vehicle. The result is that the thickness of the vehicle's tank is not enough to withstand the collision. On the other hand, it is a potential safety hazard caused by overloading. The tanker purchased at a low price by the user is often overloaded due to its heavy weight.
In order to avoid the vast number of users in the choice of tanker when the situation is at a loss, Xiao Bian today, with everyone to see how to choose a qualified tanker.
The first is the choice of tanks. The tank is a very important part of the tanker. The average user mainly considers both material thickness and welding quality. In general, after the thickness of the tank material is provided by the user to the conversion plant, the conversion plant is further designed. Under normal circumstances, the thickness of the head is slightly thicker than the thickness of the can body by 1-2mm. Most tanker tanks are 5-6mm thick. Take the example of a new car tanker for a special auto market in Longxing, the tank thickness of Dongfeng Jiayun 15-party tanker is 5mm, and the thickness of the head is 5mm.
Welding quality directly affects the tightness of the tank. If the thickness of the tank material directly affects the ability of the tanker to collide, the welding quality directly determines whether the oil can be loaded. Before Xiao Bian wrote an article on Lufeng tank trucks, the welding quality of Lufeng tank trucks was not only extremely hard but also quite beautiful. From the surface, it was like a zipper that was put away. In addition, in the special-purpose auto market of Longxing, the tanker trucks of Hubei Sinopec Warwick and Xigong Gongchu Sheng are also doing very well in welding, and they can fully meet the needs of customers.
The user transports different oil media, and the tanks are different. If the refueling vehicle is required to transport both gasoline and diesel at the same time, it is necessary to separate the positions: one store of diesel, one store of gasoline, and a separate store when transporting different edible oils.
Dongfeng Tianjin Fuel Truck
Followed by the choice of tanker. Tanker trucks can be classified into two types: oil trucks and refuellers. If the user wants to buy a refueling vehicle, it needs to understand the brand and quality of the refueling machine. The quality of old brands like Bailey Fuelling Machine, Belling Fuelling Machine, Hengshan Fueling Machine and Zhengxing Fueling Machine are all excellent. The price is about 5000 yuan for Bailey, Belling, and Hengshan. The positive star is slightly more expensive for 6,500 yuan.
Once again, it is necessary to pay attention to the inspection of the accessories certificate. Tankers are generally equipped with oil pipes, fire extinguishers, breathing valves, anti-static tape and other accessories. Chassis certification, vehicle certification, car invoices, tank reports and other household procedures is a must.
Dongfeng Oil Truck
Of course, the choice of the chassis is also very important. Users need to choose different brands of chassis according to different tonnage.
All in all, we have to consider the following three aspects: the tank, the tanker and the chassis. At present, there are a lot of good-quality tankers in the special-purpose vehicle market in Longxing. Everyone can open it and compare them.
Injection Molding Machine For Fruit Frame
High-speed injection, fast forming
The high-displacement hydraulic system design increases the injection speed by 15% compared with the same type of products, shortening the molding cycle
The high-displacement hydraulic system design, the power system is enlarged, the injection speed is 15% higher than that of the same type of products, and the mold cycle is shortened by 10-15%. The performance of the injection molding machine is comprehensively improved to meet the high-standard molding requirements.
The oil circuit board is distributed in the position of each actuator, with fast response speed, good dynamic performance, faster injection molding process, and better product molding
Stable injection, more worry-free
One-line two-cylinder balanced injection device, which significantly improves the injection stability, high repeatability, and avoids welding marks and uneven density
The injection unit adopts a modular pallet seat design, a one-line double-cylinder balanced injection device, so that the screw is evenly stressed during the injection process, significantly improves the injection stability, and makes the barrel positioning more accurate
The high rigidity wide template design, with the high safety factor tie rod, improves the rigidity and stability of the clamping structure as a whole
High efficiency and energy saving, more money saving
The unique operating principle of the servo drive + energy-saving heating device, low energy consumption, longer life, and cost saving
The servo drive can output the maximum pressure during the mold clamping, pressure keeping and cooling stages, but keep the speed close to zero, so the power consumption is small and the energy saving is more energy-saving.
The barrel adopts nano meter far-infrared high-efficiency energy-saving heating device, which improves the traditional heating coil's shortcomings of low electric heating conversion efficiency, low thermal conductivity, and high surface temperature. It saves 30%-40% energy compared with traditional heating coils.
Injection Molding Machine For Fruit Frame,Injection Molding Equipment,Plastic Injection Forming Machine,Plastic Mold Machine
Ningbo Rhea Machinery Co., Ltd. , https://www.mytao-global.com