Precautions when cleaning the outside of the tanker

     The steps of external cleaning of the tanker are as follows: 1) Remove the silt on the surface of the car body, select appropriate water column pressure, moisten the entire vehicle first, make the sediment permeate moisture, easily fall off, and then from top to bottom and front to back rinse. 2) Spray special scrubbing liquid to scrub. Add the proper amount of detergent to the foam cleaner, turn on the power supply, adjust the output pressure, spray the foam cleaning solution on the entire body surface, and wait for 1-2 minutes, then gently wipe it with a clean suede, sponge or towel. wipe. 3) Wash the foam with clean water. Use a high-pressure car washer or tap water to wash away the foam car wash that remains on the car body surface. 4) Wipe the surface of the car body with water. First use a suede to absorb water stains on the body, then use compressed air to dry the body exterior.

Although the tank truck cleaning operation is relatively simple, it must be operated in accordance with the specifications to improve work efficiency. In the car wash operation, the following points should be noted. 1) Special car washes should be used. Do not use soap or detergent. Because of the strong alkalinity of this kind of product, it will cause the paint surface to lose its light, the local color difference, the aging of the sealing rubber, and it will also accelerate the metal corrosion of the part where the paint is peeled off. . 2) Before high-pressure flushing, it must be checked whether the window and the front and rear covers are closed properly. 3) When high-pressure flushing, the water pressure should not be too high, generally not higher than 0.7MPa. In addition, the entire vehicle should be washed with scattered sprays of water and then flushed with concentrated water. For pressure-adjustable washers, the water pressure may be higher when the chassis is flushed so that the sludge and other attachments attached to the chassis can be washed away. When the vehicle body is cleaned, the water pressure can be lowered. If the water pressure of the cleaning body is too high and the water flow is too large, dirt particles can scratch the paint layer.

4) Use a soft towel or sponge when cleaning the cleaner. It is best to use a sponge to avoid scratching the paint with hard particles. 5) Use temperature-controlled washing machine, pay attention to the hot water temperature should not be too high, so as not to damage the paint layer. 6) The car wash process should follow the principle of top-down. 7) Do not wash your car in direct sunlight. 8) Do not wash the car in cold weather. Use water droplets to freeze on the car body. This will cause the paint layer to break. Car washing should be performed indoors during the cold season in the north. 9) It is found that the body of the oil tanker is accompanied by dust or impurities and should be promptly removed to avoid contamination of the paint surface.

High Pressure Cleaning Truck

High pressure cleaning vehicles, High Pressure Washing Truck, Washing Cleaning Truck, High pressure cleaning truck, also known as pipeline dredge car, strong pressure generated by high-pressure water rushed to open clogged pipes. The main part of the tank, high pressure pumps, hydraulic systems. High pressure cleaning vehicles mainly used for cleaning the city sewer, pipeline sediment, dead mud ditch dredge, can also be used for cleaning industrial drain pipes, wall surface, cleaning roads, squares ground. High pressure cleaning vehicles can also be fitted sprinkler installation green water spray gun, pediment, sprinkle, side spray, can be green watering, spraying, pressure dust, high-pressure washing roads, etc., it can be used for emergency fire fighting.

CLW GROUP TRUCK High pressure cleaning Truck Explanation

High pressure cleaning vehicles by rotation principle is to be able to have a flexible wire bend turn into clogged sewer pipes, things clog cloth, hair and the like to bring out. There is also a tool called a gun pass, a pneumatic tool to clear, using the principles of high-pressure water pipes red open clogged. Life common skin kick Son is this principle flung open the clogged pipe. Industrial pipeline dredge pipeline dredge machine due to differences in the size of the pipe with a relatively large, 100MM or less the same pipeline dredge sewer with family.

CLW GROUP TRUCK High pressure cleaning Truck With a high pressure water pump water tankers, cleaning the city sewer sediment, clear the sewer. Can also be used for cleaning industrial drain pipes, wall, etc., and can double as sprinklers, carrying water and washing highway, it can be used for emergency fire fighting.

High pressure cleaning vehicles is based on the second-class original chassis to be fitted together, partly tank tops, high pressure pump operating configuration, the high-pressure pump Model: 3DS-8/16, GYB-8/16, pressure: 16-19Mpa flow: 8m3 / h, hose length: 60m, reel force: 1800 N, hose diameter: φ19 mm, joint type: 0, reel speed: 0-25m / min, hole clip angle: 15 °, 25 ° advance force: ≥180 N.

CLW GROUP TRUCK High pressure cleaning Truck Special Features

Cleaning spray rack width (m): 2.5-3.5

Sprinkler frame deflection angle (°): about 30 each

Cleaning up the water pressure (Mpa): 9

Washing water flow rate (L / min): 120

Spray flow rate (L / min): 120

Cleaning width (m): ≥ 16

Washing water flow (L / min): 500-800

Gun range (m): ≥ 38

1. Cleaning spray rack width of 2.5m-3.5m, can control, and when the contraction of the telescopic boom, can achieve the dual flow strengthening cleaning, for cleaning the city roads, squares;

2. Left, right corner of spray for cleaning curbs, buffer zone fence, sidewalk;

3. The high-pressure spray gun cleaning;

4. The spray system can spray dust, adjust the air humidity and air spray disinfectant;

5. Rinse and low pressure sprinkler cooling; before have exclusive sprinkle (water), after punching device;

6. The road marking cleaning mechanism; suitable for cleaning road markings;

7. The noise barrier wall cleaning mechanism for cleaning urban elevated road noise barrier wall;

8. guardrail cleaning brush for cleaning the highway and urban road barrier;

9. The hydraulic lifting platform for cleaning and maintenance of urban roads and highways aerial facilities;

10. push snow shovel, snow removal for roads.

11. The self-priming function, watering green fire and auxiliary functions.

High Pressure Cleaning Truck

High Pressure Cleaning Truck,High Pressure Washing Truck,Washing Cleaning Truck,Street Washing Truck

CLW GROUP TRUCK , http://www.clwgrouptruck.net