Constant temperature incubator operation method
1. Turn on the power and press the power switch. The power indicator is on.
2. The operator must read the instructions carefully, and understand and be familiar with the incubator function before turning on the power.
3. When the incubator display temperature reaches the set temperature, the heating is interrupted and the heating indicator is extinguished. After being energized at the standard ambient temperature for 90 minutes, the temperature can remain stable. If the instant temperature in the incubator exceeds the set upper limit alarm temperature (factory setting) For 5°C) Temperature Tracker The temperature tracking alarm indicator lights, and the heater power is automatically turned off.
4. Set the temperature controller to the user's desired set temperature (this value must be higher than room temperature plus 50C).
5. If you open the glass door and take a sample, the heater and circulating winder will stop working. When the glass door is closed, the heater and fan can operate normally, thus avoiding contamination of the culture and overshoot of the temperature.
Incubator precautions and maintenance
1. The instrument should not be used under conditions of high voltage, high current, and strong magnetic field to avoid interference with the temperature controller and the risk of electric shock.
2. The incubator enclosure must be effectively grounded to ensure safe use.
3. This product has been rigorously commissioned before leaving the factory. The temperature controller menu settings data, do not arbitrarily modify.
4. Do not place flammable or explosive articles for warming to prevent danger.
5. Electroplating parts and surface finishes should always be kept clean. If they are not used for a long time, they should be coated with neutral grease or vaseline to prevent corrosion. Incubators should be covered with a plastic film dust cover to keep the incubator dry. Indoor, so as not to damage the temperature controller.
6. Do not place high-acid, high-alkali items to prevent cabinet damage.
1. Turn on the power and press the power switch. The power indicator is on.
2. The operator must read the instructions carefully, and understand and be familiar with the incubator function before turning on the power.
3. When the incubator display temperature reaches the set temperature, the heating is interrupted and the heating indicator is extinguished. After being energized at the standard ambient temperature for 90 minutes, the temperature can remain stable. If the instant temperature in the incubator exceeds the set upper limit alarm temperature (factory setting) For 5°C) Temperature Tracker The temperature tracking alarm indicator lights, and the heater power is automatically turned off.
4. Set the temperature controller to the user's desired set temperature (this value must be higher than room temperature plus 50C).
5. If you open the glass door and take a sample, the heater and circulating winder will stop working. When the glass door is closed, the heater and fan can operate normally, thus avoiding contamination of the culture and overshoot of the temperature.
Incubator precautions and maintenance
1. The instrument should not be used under conditions of high voltage, high current, and strong magnetic field to avoid interference with the temperature controller and the risk of electric shock.
2. The incubator enclosure must be effectively grounded to ensure safe use.
3. This product has been rigorously commissioned before leaving the factory. The temperature controller menu settings data, do not arbitrarily modify.
4. Do not place flammable or explosive articles for warming to prevent danger.
5. Electroplating parts and surface finishes should always be kept clean. If they are not used for a long time, they should be coated with neutral grease or vaseline to prevent corrosion. Incubators should be covered with a plastic film dust cover to keep the incubator dry. Indoor, so as not to damage the temperature controller.
6. Do not place high-acid, high-alkali items to prevent cabinet damage.
Boat Light,Led Boat Lights,Underwater Boat Lights,Interior Boat Lights,Stainless Steel Boat Light,Marine Boat Light
Shaoxing Groupstar Electric Appliance Co., Ltd. , https://www.led-auto-lamps.com