The value-added of China's machine tool industry ranks among the fastest growing countries in the world

After entering this century, China’s manufacturing industry has continued to develop rapidly during the course of reform and opening up, its overall strength has been significantly enhanced, its structure has been continuously optimized, and its ability for independent innovation has been greatly improved. The international status and competitiveness of manufacturing industries have rapidly risen in the national economy. The dominance is further enhanced.

With the rapid development of China's economy in recent years, there are more and more cities in the Pearl River Delta, Yangtze River Delta, Beijing-Tianjin-Tangshan, and other regions that have close links and regional economic competitiveness. The rapid development of industrial production, the average growth rate of industrial added value above the scale in recent years is about 20%, which is among the fastest growing countries in the world.

The output of important industrial products ranks among the top in the world. China's crude steel output, power generation, crude oil, ethylene, and some non-ferrous metal production also rank among the top in the world. The increase in the production scale of these important products has provided support for the improvement of China’s manufacturing international status.

The international competitiveness of the manufacturing industry continues to increase. Since the accession to the WTO in 2001, the integration of “Made in China” and the world economy has further accelerated, and manufacturing has become China’s main field of economic globalization. Exports of labor-intensive products such as textiles and light industries with comparative advantages maintained a good momentum, and exports of high value-added products such as machinery and electronics grew rapidly, and their share in total exports continued to increase. At the same time, imports of advanced foreign technologies and complete sets of equipment have also increased significantly. According to Luo Baihui, secretary-general of the International Mould and Hardware and Plastics Industry Suppliers Association, the mold manufacturing industry has also become China's main field of attracting foreign investment. In recent years, actual foreign investment in the mold manufacturing industry accounts for more than 70% of the actual use of foreign capital in China.

The structure of the manufacturing industry is constantly optimized and upgraded. In recent years, through the effective implementation of industrial policies, it has actively promoted industrial restructuring and promoted the optimization and upgrading of the manufacturing structure. The energy and raw material industries have achieved rapid development and have formed strong support for the national economy. The level of equipment has rapidly risen, and the level of major equipment technologies and the rate of autonomy in power generation, CNC machine tools, molds, building materials, petrochemicals, metallurgy, and non-ferrous metals industries have steadily increased, and the competitiveness of products has continuously increased, which has also effectively promoted the upgrading of traditional industries. Efforts have been made to eliminate backward production capacity, and the product structure of high-energy-consuming industries has improved.

The organizational structure of the company is continuously optimized. In recent years, the pace of corporate mergers and reorganizations has accelerated. At present, a large number of large-scale backbone enterprises and enterprise groups with high technological content and good economies of scale have emerged in the iron and steel, non-ferrous metals, molds, building materials, and textile industries, which have promoted the overall quality of China's industry and International competitiveness has improved.

Accelerating the process of industrialization is still an urgent and arduous task facing China's economic development. Luo Baihui believes that in accordance with the requirements of the scientific concept of development, we must speed up the transformation of economic development methods, accelerate the integration of industrialization and informationization, and persist in taking the new features of Chinese characteristics. The industrialization road has promoted a steady increase in the quality competitiveness of China's manufacturing industry. It mainly does four aspects:

-- Manufacturing standards and technology continue to increase;

——The quality of the company’s quality management has steadily improved. The number of enterprises that have obtained management system certifications has increased significantly. The quality of economic losses caused by the emergence of substandard products, repairs, etc. to the manufacturing industry has decreased as a percentage of total industrial output value.

——The capacity for independent innovation and new product development continue to increase. China’s large and medium-sized manufacturing enterprises have a total of more than 42,000 patents and sales of new products have exceeded RMB 4 trillion, a year-on-year increase of 50.72% and 29.78% respectively;

——The degree of industrial concentration has further increased. In 2007, the average product sales income of Chinese large and medium-sized manufacturing enterprises reached 680 million yuan, indicating that production resources will be further concentrated in leading enterprises.

Judging from the twenty-nine industries in the manufacturing industry, the quality competitiveness index of the twenty industries has improved to a different extent than in 2006. The number of industries with a quality competitiveness index of over 85 has increased from one in 2006 to two; the industries with less than 75 are reduced from five in 2006 to two.

Among the manufacturing industries in 31 provinces, the quality competitiveness index of 26 provinces (autonomous regions, municipalities directly under the Central Government) has increased. Fifteen regions in Beijing, Tianjin, Liaoning, Shanghai, Jiangsu, Zhejiang, Anhui, Fujian, Jiangxi, Shandong, Hubei, Hunan, Guangdong, Chongqing, and Shaanxi have quality competitiveness indices of more than 80, and their quality competitiveness is obvious.

By the end of 2011, there were 2,647 industrial enterprises engaged in metal processing machinery manufacturing in China, and the total assets of the industry reached 331.4 billion yuan, a year-on-year increase of 24.97%. The data show that: In 2011, China's industrial enterprises engaged in metal processing machinery manufacturing enterprises above designated size achieved a total revenue of 403.957 billion yuan, a year-on-year increase of 28.08%, and a total profit of 28.036 billion yuan, a year-on-year increase of 24.24%.

China is in the mid-industrial period. The pursuit of mechanization and automation in all sectors of the national economy is a general trend. In the longer period of time, there is a stronger demand for machinery and machine tools as basic equipment. However, the demand for prosperity will also follow the macroeconomic situation. Changes fluctuate.

According to Luo Baihui, secretary-general of the International Mould and Hardware & Plastics Industry Suppliers Association, the metal processing and manufacturing industry includes: metal cutting machine tool manufacturing, metal forming machine tool manufacturing, foundry machinery manufacturing, metal cutting and welding equipment manufacturing, machine tool accessories manufacturing, and other metals. Processing machinery manufacturing and other six sub-sectors. From the perspective of major user industries, the automobile industry, railway transportation equipment industry, aerospace industry and shipbuilding industry will maintain relatively strong demand for machine tool equipment. Although the amount of metal processing in the electronic information industry is not very large, due to its rapid expansion, the demand for machine tools and equipment is also increasing.

Luo Baihui said that the traditional machinery manufacturing industries such as metallurgical machinery, general machinery, construction machinery, power generation equipment, and molds are also undergoing industrial upgrading under the guidance of the national policy of revitalizing equipment industry, and will inevitably further improve the technical level of their machine tools and equipment.

In the future, China's machine tool consumption structure will be further upgraded. The demand for high- and mid-range CNC machine tools and complete sets of equipment will continue to increase, while the demand for ordinary and small- and medium-sized machine tools will significantly slow down. The market situation requires that machine tool manufacturers accelerate Product structure adjustment. Luo Baihui believes that the increase in the output of CNC machine tools in China is no longer a key factor. Optimizing the output composition of domestic CNC machine tools and vigorously improving the overall development quality of domestic CNC machine tools are imperative.

Water / Juice Bottling Line

Bottling Water Production Line,Mineral Water Production Plant,Water Bottling Machine

Plastic mold,RO products Co., Ltd. ,