The failure of the engine is generally caused by wear. The friction consumption is generally caused by friction. It is the dream of every mechanical engineer to protect the engine forever. It is also the top research topic for a long time, and the engine protection agent can prevent the engine from being prevented. Wear and allow the worn engine parts to repair themselves to a certain extent, and its appearance has doubled the life of the engine. 
First, the principle of engine protection agent
In the high temperature and high pressure environment of the engine, a very thin layer of molybdenum alloy with good compressive strength and wear resistance can be formed on the metal surface of the engine. The sulfur in the lubricating oil combines to produce MoS2 after the thickness of the alloy layer is saturated. A layered hexagonal crystal film can significantly reduce the coefficient of friction, leaving the remaining hexagonal crystal film to be repaired at any time. The molybdenum alloy protective layer and the hexagonal crystal film have excellent lubricating properties under high temperature (1200 degrees), ultra-low temperature, high rotation speed, high pressure and vacuum conditions, can greatly reduce the friction inside the engine, and significantly improve the oxidation resistance of the lubricating oil, effectively It inhibits the oxidative degradation of lubricating oil while reducing the formation of high temperature deposits and low temperature sludge, resulting in superior overall protection for the engine.
With pure polycarbon 10 polyalpha olefin as carrier and special organic molybdenum lubrication formula, it will not be like ordinary engine protectant, dilute oil viscosity, affect the balance of original organic oil additives, can be mixed with any specification of oil and exert excellent lubrication. effect.
The engine is only protected by lubricating oil and the surface looks smooth, but the truth is more intuitive after zooming in, so please do not just change the oil, please give the engine extra protection. 
Second, engine protection agent product performance
1. It can effectively reduce friction and anti-wear, improve mechanical efficiency and reduce engine noise.
2, super protective oil film is attached to the metal protective film, no random oil flows into the oil sump, protects the engine in cold start.
3. Effectively solve the defects of the traditional metal anti-wear additive in cold start protection, and truly realize the engine “zero wearâ€.
4. Support oxygen sensor and three-way catalytic converter to reduce exhaust emissions.1. Add this product to the engine oil. Before the addition, it should be idle to make the vehicle temperature reach normal.
2. The vehicle is used once every 5000-15000 kilometers.1, do not enter, once you eat, please seek medical attention immediately
2, away from children
Engine protection fluids reduce friction to improve engine horsepower performance while reducing fuel consumption for smooth operation. It is possible to increase the life, and engine protection should start from a new car.
China leading manufacturers and suppliers of Steel Props ,Adjustable Shoring Support, and we are specialize in Adjustable Steel Prop,Steel Shoring Prop, etc.
Steel Props,Adjustable Shoring Support,Adjustable Steel Prop ,Steel Shoring Prop
China Steel Props,Adjustable Shoring Support,Adjustable Steel Prop Manufacturer
Steel Prop
Steel Props,Adjustable Shoring Support,Adjustable Steel Prop,Steel Shoring Prop
Hebei Qierjie New Energy Technology co., Ltd , https://www.qejfastener.com