Comparing compressed garbage trucks with other garbage trucks

Just as there are no two identical leaves in reality, the products of the same type are also very different, and it cannot be judged whether the various products in the same period are superior or inferior. It can only be said that each has its own goodness and drawbacks. Here we only compare the maximum qualities of different models in the garbage truck type. I want to compress the biggest feature of garbage trucks that distinguish them from other similar products. The main reason is that their compression characteristics are emphasized in the beginning of the design. They can automatically load and compact the garbage and facilitate transportation under limited carriage restrictions. More garbage. Then for the characteristics of other models, the following briefly discussed.

1

First, the dump truck features. The model is equipped with a hydraulic lifting component, which uses the weight of the garbage to tilt the carriage to a certain angle and then slides the garbage through the carriage to the unloading place. This type of vehicle uses the simplest physical principle and is the basic model of a garbage truck.

Second, self-loading garbage truck features. The design improvements made on the basis of self-dumping garbage trucks have reduced the process of manual loading of garbage and greatly improved the loading and unloading performance of garbage trucks. The installation of a dedicated device for self-loading and unloading is generally required, but it is generally limited to the loading of garbage storage devices that are fully compatible with the vehicle's own equipment.

Third, the swing arm garbage truck features. With the lifting of the lifting arm swinging to achieve garbage self-loading models. Equipped with a retractable crane bucket, swing arm, or directly suspending the garbage assembly on the swing arm for loading and unloading.

Fourth, the characteristics of unloading garbage truck. The unique ability to tow or detach a dedicated car to make it more versatile. With loading and unloading hydraulic components,

Fifth, the characteristics of sorting garbage trucks. The self-dumping components, non-single garbage collection bins, and compartment seals of this type of vehicle are all design highlights. Excellent performance in transportation sorting performance.

Sixth, compression docking garbage truck features. In addition to the compression devices included in a single compressed garbage truck, dedicated lift docking devices have also been added. In the process of docking for shipment with a large garbage truck, the lifting docking device plays a characteristic that other garbage trucks do not have.


our dished heads are used in a variety of applications and industries such as storage tanks, pressure vessels, road tank, food processing operations, chemical plants ,Nuclear operation, Oil Refining, Architectural feature, power generation.

Due to our forming experience and equipment, we can spin or press the first part of the process of forming your products, It depend on the thickness and material performance,

Our main products are 2:1 SE dished heads, Torispherical heads, Cones,Hemispherical Heads etc

Choosing the right type is the key decision for each customer and one for which our experience team to happy to give advice, simple speaking, the torispherical heads, the less ressure it can withstand, Conversely, the deeper dished heads, for example Elliptical heads, hemispherical, the greater pressure it can take.

Our in house-capability to form dished heads by cold press brings major benefits to our customers and sets us apart from others dished heads manufactures

For carbon steel dished heads, we can forming this dished heads from 76-9000mm in diameter and below 250mm in thickness  

The general forming process as the below sketches forming process

Technical Delivery Condition
1,Our material (hot Rolled Unalloyed structural steel, high and low temperature steel, High Alloy steel)
We have no carbon steel plates in our stock and most of plates are from Chinese steel market or mill. Meanwhile As Japanese owed company, We can also source the plates from Japanese ex-mill if end user can`t accept ex-chinese mill.
Basically the delivery time shall be below 20days for dished heads if plates are from steel market. and Max plates width from them is below 2200mm. it means that the seamless dished heads diameter shall be below about 1800mm.
The max width CS plates that Chinese mill can do is below 4700mm,and dished heads can be seamless below 3800mm in
diameter.


2,Enquiry/order required information

We can give our clients once they gave us the below information

But if clients tolerance is higher than below Hokkai standards, it shall be provided to Hokkai prior to offer or ordering.

Enquiry/order required information

Stainless Steel Elliptical Head

Stainless Steel Elliptical Head,Stainless Steel Elliptical Dish,Stainless Steel Sprinkler Elliptical Head,Stainless Steel Material Elliptical Head

YIXING HOKKAI HEAD PLATE CO.,LTD , http://www.hokkaidishedend.com