Pneumatic knife gate valve installation and use

Pneumatic knife gate valve installation 1. Check the valve chamber before installation and sealing surface and other parts, do not allow dirt or grit attached; 2. The bolts connecting parts, uniform tightening; 3. Check the packing parts required compression , Both to ensure that the packing seal, but also to ensure that the gate open flexible; 4. Users in the installation of the valve before the valve must be calibrated, connect the size and pay attention to the flow of media to ensure consistency with the valve requirements; 5. When the user install the valve , The necessary space for valve actuation must be reserved; 6. The wiring of drive unit shall be carried out according to the wiring diagram; 7. The pneumatic knife gate valve must be regularly maintained and free of collision and squeezing so as not to affect the sealing. Search Keyword: More Valve Technical Articles Valve Products Supply Information

Automatic Air -cooling Block Molding Machine

Adjustable Foam Machine,Foam Eps Block Machine,Automatic Eps Molding Machine,Block Polystyrene Equipment

Zhejiang Huasheng Machinery Equipment Co.,Ltd , https://www.zjhsfoammachine.com