Ways to prevent the core from loosening

1, loose reasons

During the operation of the motor, the iron core punching film is thermally expanded during the operation of the motor, and the paint film on both sides of the punching film is flattened and pressed under the thermal expansion force, and the bonding structure between the sheets is collapsed, and the iron core punching piece is generated. Loose. After the iron core is loosened, vibration will be generated between the punching sheets, so that the insulating layer of the punching sheet is further worn, and the loosening gap of the iron core punching sheet tends to be stable. Obviously, only the loose gap caused by the thermal expansion force is not enough to cause noise failure, but once superimposed with abnormal factors, the problem is complicated and highly randomized.

2, prevention methods

Since the problem of looseness of the punch due to the late use of the motor is scarce, most of the motors can be found in the production process.

Generally, when the motor core is laminated, the iron core is harmful to looseness. There are two factors: one is that the punching piece has burrs or unevenness, and the iron core weight control must be used to avoid the problem; the second is that the stacking pressure is in an uncontrolled state. The pressure lamination must be strictly in accordance with the operating specifications under the premise of ensuring that the pressure of the pressure equipment is normal.

For most motor manufacturers, especially after cold heat generation, due to the quality reliability of the silicon steel sheet itself, the small-size iron core has eliminated the end plate, generally ensuring the weight of the iron core can ensure that the iron core does not bounce off. However, for large-size products, especially those with radial air ducts, due to the special characteristics of the manufacturing process, if the iron weight is still premised, the problem of loosening of the core and loosening of the punching often occurs, according to the number of pieces. Control is the most effective means.

I have encountered three similar noise-cranked motors. The treatment method is to treat the secondary varnish, and most of them will be better solved. For partial loosening, the problem can be alleviated by the local brushing resin curing method. However, it is essential to eliminate the core, the initial stage of iron core manufacturing, to understand the loosening mechanism of the iron core, to make the damage loose, and to eliminate the hidden dangers in the bud.

Want to know more exciting information, please pay attention to China Iron Core Trading Network

"C/Z/U Purlin Roll Forming Machine

C shape roll forming, Z shape Roll Forming Machine and C&Z interchangeable roll forming machine. C purline, Z purline, H beam and others are used for big house building. They are the frame of the house. Normally speaking, the thickness of the material is between 1.5-3.0mm. So for the roll forming machine, it has high standard requirements." It can be widely used in the large and medium-sized enterprise civil construction, such as plant,warehouse,locomotive shed,hanger,exhibition,theatre,stadium and so on.

c z purlin machine

C/Z/U Purline Roll Forming Machine

Purline Roll Forming Machine,Corrugated Roof Profile Machine,U Bracket Solar Power Stent Manufacturing System

Zhongtuo Roll Forming Machinery Co., ltd , https://www.rollsformingmachines.com