Dongfeng Parts Group unveiled at 2018 Moscow Motor Show Dongfeng Parts Group also cooperated with spare parts export distributors to build a cooperation model of “Dongfeng spare parts platform + domestic distributors + overseas distributors†with Dongfeng brand influence and dealer regional advantages, and expand Dongfeng Parts Group overseas. Spare parts market. During the exhibition, a total of more than 60 potential customers came to negotiate and learn about Dongfeng parts and products. For example, China Motor Corporation, a Russian auto parts distributor, came to visit and consulted whether it could become the authorized distribution of Dongfeng Zero Group. Business.
The first stop of the Hubei Provincial Department of Commerce delegation went to the Dongfeng parts booth to conduct research and make every effort to go out for business.
Dongfeng Parts Group and local distributors, parts suppliers
In order to further understand the Russian auto parts market, the expansion team inspected the auto parts market and exchanged ideas with local distributors. One of the dealers said that they planned to visit Dongfeng Parts Group in Wuhan in November 2018 to discuss the spare parts business cooperation.
In terms of OEM expansion, this exhibition invited Autovaz, Russia's largest auto company, to negotiate. Autovaz is a subsidiary of Renault Nissan Alliance. In addition to introducing Dongfeng parts group and negotiating thermostat business to customers, Dongfeng Limited Business Planning Department from the perspective of alliance Recommend Dongfeng Parts Group products to customers and invite them to visit Dongfeng at the right time.
According to Russia's requirements for the localization rate of the whole vehicle, “investment and construction, nearby supply†has become an important form of Russian OEM support. Dongfeng Parts Group can seize the opportunity to deepen the Autovaz market with the cooperation platform of Dongfeng and Nissan Alliance. After acquiring new projects, it is necessary to actively plan the localized production layout and support the automakers to increase the localization rate. The new situation of Dongfeng Parts Group's overseas business.
Reading volume: Source: Dongfeng Components Group Author: ZebianA bicycle basket carries is for carrying, usually light, cargo on a bicycle. They are usually used for light shopping duties such as going on daily visits to the shops for fresh bread or milk. Baskets are often mounted on the handlebars and made of traditional basket weaving materials such as wicker and cane or even woven plastic that merely looks like wicker or cane. They can also be made of other materials such as metal mesh.
Front baskets:
Front baskets are usually mounted on the handlebars though sometimes there are also braces that extend from the basket to the front hub bolt or to tabs on the front fork of the bicycle.
Overloading a front basket can be problematic if not treated sensibly. Heavy loads can throw off the handling of the bicycle as the load is attached to the handlebars and high up on the Bicycle Frame. Also any load that is far too large could possibly obstruct the rider's vision. Light shopping loads are usually not a problem.
Rear baskets:
Other types of baskets may be mounted on a luggage carrier near the rear wheel of the bicycle. These baskets are usually narrower and deeper than the average handlebar basket. Rear baskets function as a hard-sided pannier, carrying the cargo lower on the bicycle, which keeps the center of gravity low and thereby improves handling and control. This placement also cannot obstruct the forward vision of the rider.
Front Bike Basket, Kids Bike Basket, Plastic Bicycle Basket, Steel Bicycle Basket
Hangzhou Datasports Equipment Co.,Ltd(Oembicycle) , https://www.oembicycle.com