Installation: Select the installation location according to the scope of the machine, and ensure that there is sufficient maintenance space.
debugging:
1. The rotor has been balanced before leaving the factory. Users generally do not need to perform balance test. When replacing the hammer and rotor parts, they should be balanced.
2. The main machine installation should be balanced, the spindle horizontality error is less than 1mm/m, the main driven wheel is in the same plane, the belt is adjusted to be tight and the motor is fixed.
3. Check that the mounting position of each component is moving, deforming, locking all bolts, and check that the seal is good.
4. Check the wiring and fastening of the electrical box, adjust the delay relay and overload protector, turn on the circuit, test the motor steering, and select the fuse of the appropriate specification.
5. Check the hydraulic system for reliable operation and leakage.
6. Remove the foreign matter in the impact crusher and move the rotor by hand to check for friction or collision.
ZXZ Auto pares The products which manufactured by our company such as Gear Blank ,gear sleeve,cam,2nd and 3rd generation hub bearings, Vane Of Oil Pump, Vane Ring Of Oil Pump, Shaft Sleeve ,have been widely used in gearbox, engine, hub of automobiles, and we are cooperative with customers from Audi ,GTMC,VW,DPCA,SAICMOTOR,FIAT, Hyundai. Forgings are produced by 1000T+1600T electric screw press machine, using medium frequency induction heating and full automatic operating by robot , and Japan MANYO1300T walking beam forging equipment for high quality assurance, has lower allowance, advantages of materials saving and better metal streamline. Use Swiss Hateubr high-speed forging equipment AMP30S, in order to avoid the risk of water caused cracks munting with lateral unloading system on the equipment, has advantages of lower allowance, better parallel and concentricity, no end face burr and chamfer defects happened.
Auto Parts,Auto Spare Parts,auto parts accessories,Automatic Parts
ZHEJIANG XCC GROUP CO.,LTD. , https://www.xccbearing.com