The speed of road transport is continuously increasing. Now, the average operating speed of heavy-duty trucks has reached 80-90km/h at high speed. The high-speed operation of trucks has also put forward new requirements for the configuration of the vehicle.
"Big horsepower engine + speed gearbox + single-speed reduction bridge" is currently a more popular combination in China. The high horsepower engine can provide users with stronger power and more stable performance. The overspeed transmission and the single-stage reduction bridge can increase the running speed of the vehicle.
â— FAW Jiefang J6 390 high-speed road conditions in 2011 the main push hot high-power tractor 
The Liberation J6 is the sixth-generation truck launched by FAW. It has been developed using the latest international truck research and development method for six years. Since its introduction to the market in 2007, it has achieved user recognition with outstanding performance and stability, and at the same time, the Liberation J6 has also reflected the continuous improvement in the level of independent innovation in China's automobiles.
The engine adopts the liberation of the CA6DM2 390 engine. The liberation of the Aowei 11 liter series of engines employs an overhead camshaft four-valve structure. The 11-liter displacement is also referred to as the domestic gold displacement of heavy trucks. Transmission uses Fast 12JS180TA gearbox, the highest speed ratio of 0.78. The rear axle adopts the liberation and maturity of the 457 rear axle with a speed ratio of 4.111. If the user is overloaded during the process, the 485 axle with greater torque can also be selected.
In terms of other configurations, the TRW steering gear imported from the United States is used. The cross section of the frame is 300×80×8. The suspension uses three springs after the first three after four, JOST 90 saddle, and the tire is 12R22.5 vacuum tire. Optional ABS system, install domestic ABS needs 5,000 yuan, imports need 8,000 yuan.
The cab suspension form adopts four-point full floating suspension plus airbag damping seats to improve driving comfort, electric lift, central control lock, central air conditioning, and other domestic high-end heavy truck common configurations are also readily available. High-pressure common rail vehicles use LCD meters to display mileage, fuel consumption, and more.
The loading condition is recommended: The total cargo weight is less than 55 tons, the speed is 80-90km/h, and there will be good power and fuel consumption performance under the plain high speed conditions.
Clear Flat bag is made from Food Grade Virgin material. environmentally friendly and hygienic. They are water-proof, Moisture-proof, strong toughness, tear resistance, good for storage and usually for packing sugar, biscuits, candy, coffee bin, fruits , drinks or other foods. Normally width from 3 inch to 12 inch. Length from 7 inch to 22 inch. Material could be in HDPE or LDPE.
Clear Flat Bags, Polyethylene Flat Bags, Clear Flat Polyethylene Bag, Side Seal Bag, Clear Bag, Crystal Clear Side Gussets Bags
BILLION PLASTIC MANUFACTURING CO.,LTD, JIANGMEN , https://www.jmplasticbag.com