Beneficiation plant workshop internal device configuration, the process due to different factors, such as equipment type and terrain conditions vary.
1. The configuration selects the slope topography of 20°~25°, which is arranged along the slope. The main passage is on the left side of the slope, so the maintenance site is also set on the left side. If there is a difference between the terrain and the external channel, it should be changed.
2. The crushing plant, the main crushing equipment is concentrated in the same plant for easy maintenance and repair, and the belt conveyor between the equipments is considered in the shortest distance. In engineering design, it can be adjusted according to the terrain.
Meanwhile, a small design commonly used non-ferrous metal concentrator crushing and screening equipment unit installation diagram for engineering design selected equipment, workshop by using a combination of the design of the system should be made.
3. The main plant is configured with different sizes, metal types, different ball mill specifications and number of units, and different layouts with flotation machines and flotation columns. In the engineering design, according to the specific terrain conditions, equipment specifications and quantity, reference can be made to the new workshop combination design.
Only the position of the drug delivery station is shown in the main plant. The selection and installation of the specific drug delivery equipment can be determined by itself in each project.
4. The relative position of the dewatering plant and the main plant should be determined by the terrain. Considering the gravity of the concentrate slurry (the slope of the pipe should not be less than 8%) and the loss of the height difference of the sampling facilities (generally about one meter). At the same time, considering the convenience of the final concentrate transportation, it can be built or separated from the main plant.
The concentrator can be set up in the open air except for the cold northern regions.
5. The form of concentrate shipment is determined by factors such as concentrate packaging, concentrate quantity and transportation means. In the configuration diagram, there are high-station low-station, overhead loading and grab loading, etc., which are determined by engineering design.
First, the crushing plant configuration (a) 250 × 400 jaw crusher , Ф 600 × 400 pair of roller crusher two sections a closed circuit crushing plant (see below)
[next]
(2) Two-stage closed-circuit crushing plant of 400×600 jaw crusher and Ф600 standard cone crusher (see below)
[next]
(3) Two-stage and one closed-circuit crushing plant of 400×600 jaw crusher and Ф600 standard cone crusher (with intermediate buffer mine bin) (see the figure below)
[next]
(4) 400×600 jaw crusher, Ф900 medium cone crusher, two sections, one closed circuit crushing plant (I) type (see below)
[next]
(5) 400×600 jaw crusher, Ф900 medium cone crusher, two sections, one closed circuit crushing plant (II) type (see below)
Atrazine 50 Wp,Best Weed Killer,Selective Herbicide,Herbicides Atrazine
HENAN BONSIN CHEMICAL CO.,LTD , https://www.bosinchem.com