From December 12 to 14, 2011, the 2012 Central Economic Work Conference was held in Beijing, which identified the main line of continuing to seize the theme of scientific development and speeding up the transformation of the mode of economic development. The meeting clarified five major tasks for China's economic work in 2012. Among them, the third article focused on strengthening the work of energy conservation and emission reduction. This also pointed out the development direction for the later development of the lubricant industry.
Looking at the current situation of the domestic and foreign lubricants industry, Europe and the United States have basically entered the era of synthetic lubricants, and China's lubricant base oil production process, the "old three sets" (solvent refining, ketone benzene dewaxing, white clay (Supplementary refining) still accounts for more than 65%, and the base oil resources it produces cannot meet the standards of low-carbon economy based on low energy consumption, low pollution, and low emissions. The use of hydrogenation technology (hydrogenation, hydrotreating, hydrogenation, and decanting) is one of the few manufacturers of national standard base oils. Therefore, whether it is now or in the coming years, advocating energy conservation and environmental protection will be the main theme of the lubricant industry. Both the production process and the supply structure of the lubricant industry will face new challenges.
In view of the current status of the domestic lubricant industry, the following lubricating oil products will exhibit the following trends: 1. The old three sets of production processes will be gradually replaced by hydrogenation processes, and high-quality lubricant raw materials will dominate the market; Low-end products such as CC, CD and SF will gradually exit the market, CF-4, CH-4, SJ, SM and other grades will gradually become the mainstream of the market; 3. New environmental protection, energy-saving product development is the foundation of the company's development; 4 The application of multi-grade oil will be more extensive, and the single-stage oil market will further shrink; 5. High-performance additives, especially composite additives, nano-materials, compounding agents and extreme pressure anti-wear agents will be more widely used. In summary, the author thinks that the direction of development of the lubricant industry in the later period can be summarized into six words: energy saving, environmental protection, and economy.
Shell extends channels to deepen the domestic lubricant market
Wu Ruizhen, vice president of business fuel oil and lubricants business of Shell Asia Pacific/Middle East, recently faced the media for the first time in Beijing. According to its disclosure, Shell’s share in China reached 8% in 2010, maintaining a double-digit growth, and Shell will continue to increase China Investment. Shell optimistic about the expansion of the Chinese market, "China's promotion of industrial upgrading, especially energy conservation and emission reduction, which means that the market needs better lubricants." Wu Ruizhen said that environmental protection and fuel efficiency is Shell's focus, will and cooperation Together, partners will allocate lubricants and fuels to increase efficiency and reduce emissions.
Gail Lubricants New: Technology Pilots Energy Saving and Emission Reduction
A new generation of green, environmentally friendly vehicle health and energy-saving products developed by Beijing Century Gaeler Technology Development Co., Ltd., Gale Lubrication King, will officially land in Beijing in November 2011. Gail Lubrication King is a special high-efficiency engine oil, which is made by adding rare metal elements. The traditional sliding friction is rolling friction, which reduces friction coefficient by 30% and effectively reduces engine wear. This product is a special functional lubricant produced using the world's advanced engine repair technology. Its technology has been successfully applied to Apollo moon landing equipment in the United States. Since the 1980s, it has been popular in Europe, America and five continents. It can automatically repair the internal wear of the engine, and at the same time form a strong anti-wear and super-lubricant protective layer on the surface of the machine, which can improve the power of the engine, reduce engine noise, save fuel, and extend the oil change cycle to run 15,000 kilometers. The product has passed the authentication of domestic and foreign authoritative testing organizations. Over the past two years, after repeated application of thousands of vehicles, the users have responded well and the effect has been apparent. Is a new generation of automotive health energy-saving emission reduction products. In advocating environmental protection and low-carbon life, energy saving is no longer a slogan. Energy-saving products have already brought about changes in our living environment to a large extent. Gail Lubricating King this time to land in the capital, will bring new "new ideas for car health" for the majority of riders. Since 2001 Gaelic Technology Development Co., Ltd. was established in the century, has been committed to research and development of automotive exhaust emissions control, energy conservation, increase A series of products that power and protect the engine and extend its service life. Reward customers with high quality, environmental protection and benefit the public.
Kunlun leads the industry into lubricants "green lubrication"
On November 16, 2011, the "12th China International Lubricants & Application Technology Exhibition" was jointly sponsored by CNPC (601857, Baiba) Lubricant Company and China Council for the Promotion of International Trade Shanghai Branch. Lubic China 2011) was launched in Beijing China International Exhibition Center. Yang Junjie, deputy chief engineer of China National Petroleum Corporation, attended the opening ceremony of the exhibition and pointed out that innovating industrial technology and promoting green development of the industry have become the future direction of the lube industry. They urge industry peers to increase the research and development of lubricant energy-saving and environmental protection technologies and promote the lube industry. healthy growth. At present, China has become the world’s second largest oil production and consumption country. It consumes more than 15% of the world’s lubricating oil and nearly 40% of the grease. The rapid progress of the automobile industry and the development of energy-saving and emission reduction and low-carbon economy are all The future development of the lubricant industry puts forward new requirements and it is imperative to promote the development of green energy conservation in the lubricant industry. As a leading brand in the domestic lubricants industry, Kunlun Lubricants will continue to work hard to achieve the environmental protection and energy conservation of automotive oil through technological breakthroughs and promote the healthy development of the lubricants industry.
Industry experts pointed out that the current green energy has become the center of gravity and the trend of the development of the lubricant industry, domestic and foreign lubricant industry giants have adopted technical research to enhance the performance of energy saving and environmental protection of lubricant oil products. As a leading company in the lubricants industry, CNPC's continuous investment in the research, development, and development of automotive lubricants, environmental protection and energy-saving oil products, as well as various important R&D achievements, will surely promote the “green lubrication†of the domestic lubricant industry. Leading the healthy development of the industry.
Smaller scale bottling line
Next the bottle enters a labelling machine ("labeller") where a label is applied. To ensure traceability of the product, a lot number, generally the date and time of bottling, may also be printed on the bottle. The product is then packed into boxes and warehoused, ready for sale.
Depending on the magnitude of the bottling endeavor, there are many different types of bottling machinery available. Liquid level machines fill bottles so they appear to be filled to the same line on every bottle, while volumetric filling machines fill each bottle with exactly the same amount of liquid. While gravity filling machines are most cost effective. In terms of automation, inline filling machines are most popular, but rotary machines are much faster albeit much more expensive.
Some bottling lines incorporate a fill height detector which reject under or over-filled bottles, and also a metal detector.
After filling and corking, a plastic or tin capsule is applied to the neck of the bottle in a capsular. Next the bottle enters a labeller where a label is applied. The product is then packed into boxes and warehoused, ready for sale.
Cottonseed Vegetable Oil Filling Plant Turnkey Project,Palm Oil Filling Plant Turnkey Project,Sunflower Oil Filling Plant Turnkey Project,Soybean Oil Filling Plant Turnkey Project
Hebei Huipin Machinery Co.,LTD , https://www.oilpresschina.com