PICS:
Specifications
Motorcycle parts name | CHAIN ADJUSTER |
Motorcycle model | EN125,etc |
Product Material | METALÂ |
Delevery time | 10days |
Origin | China |
Application | OEM or ODMÂ |
Payment Terms | T/T,Western Union |
Color | optional   |
Shipping Way:
Guangzhou BOST Trading Co. Ltd
Web:www.bostmoto.com
Http://bostmoto.en.made-in-china.com
TEL:+8618933995757 OR +8613802510953Â
ADD:1-2F,A7 Building, Shijing Creative Garden, Shitan Road, Baiyun District,Guangzhou,Guangdong, China
The gear-type divider can separate flow into two or more paths. A gear divider consists of a housing, two or more internal sections of mating gears, and barriers that separate the sections from one another. A common shaft connects the gear sections. Flow enters one end of the housing and routes through a channel to each of the gear sections. Fluid forces act on the gear teeth, causing them to rotate in opposite directions. Fluid between the gear teeth and housing is carried around to the opposite side of the gear section. As the teeth mesh, fluid is pushed out of each outlet port.
Because all the gear sections are connected, all the gears rotate at the same speed. The positive displacements of the gear sections produce a constant division of the flow. Inlet flow is divided proportionally between each section. Even if pressures in the output circuits vary, the output flows are proportional to the input. Should the input flow vary, output flows will likewise vary proportionally. And if one output is blocked, the others are also blocked. A relief valve prevents pressure intensification.
Gear-type dividers can also be used to combine return flow in circuits. Most spool dividers are not designed to permit reverse flow.
Flow Dividers
Flow Divider,Farm Flow Dividers,Synchronous Flow Dividers,Conveyors Flow Dividers
GRH , https://www.grhcn.net