Wang Dexue, deputy director of the office of the State Council's safety committee and deputy director of the State Administration of Work Safety, said recently that there are difficulties in the rectification and closure of metal non-metal mines, which is mainly reflected in the fact that illegal illegal production and construction in this area is a serious phenomenon, and that there is resistance to the rectification and closure work. And so on, the State Council Security Office is working with the relevant departments of the State Council to study related policy measures.
Wang Dexue said that at present, the phenomenon of illegal and illegal production and management of metal non-metal mines is still very serious and the proportion of accidents is still high. He said that there are certain obstacles in rectifying and shutting down the work, mainly because some areas are unwilling to push for rectification and closure with various reasons. Some small mines will use various excuses or different ways to avoid rectification and closure. At the same time, the rectification and closure of non-metallic metal mines not only requires a lot of manpower, material resources and financial resources, but also may affect the fiscal revenue of some regions in the short term. In addition, the hidden dangers of closed mines in terms of safety production, geological disasters and the environment also need to be remedied, and the workload is large.
Wang Dexue expressed that the next step is to continue to carry out the work of “doing non-response violations†in a deep-going manner, and maintain a high-pressure situation of severely cracking down on illegal and illegal production, operation, and construction behaviors, so as to prevent rebound and resurgence. In addition, we must actively study relevant policies and measures and steadily advance the work of rectification and closure. The local people's governments at various levels will also study and formulate supporting policies and measures for the transformation of metal non-metal mines such as support for production transfer, economic compensation and employment training, and strive to promote the smooth implementation of the rectification and closure work.
The structural composition of the drum chip machine: the frame, cutter roller, upper and lower feeding roller, conveyor belt, hydraulic system and other parts constitute the structural main body of the drum chip machine.The base of the drum slicer is welded with high cavity steel plate, which is the basic support part of the whole drum Wood Chipper.Two flying knives are mounted on the drum type wood slicer.Using the flying knife bolt made for the drum chipper, the flying knife is fixed on the cutter roller through the pressure block;Such a design can be based on the different cutting materials, feeding roller can be used in a certain range of hydraulic system to float up and down, can achieve the effect of cutting different specifications of wood chips.
Hammer Roller Wood Crusher,Plyboard Wood Chipper,Crushing Plyboard Wood Crusher,Drum Wood Chipper
Jinan Shanghangda Machinery Co., Ltd. , https://www.shdmachines.com