JKCS300
Application                                                                               Â
JKCS300 Multi-functional truck mounted water well drilling rig is an efficient, multi-function full hydraulic water well drilling rig. It is high efficiency because of having a larger torque of the turntable and is mainly used for water well in industry and agriculture, national defense building foundation, geological exploration,geothermic well and other foundation working, it is popular at home and abroad.
JKCS300 truck mounted drilling rig can drilling in all kinds formations by mud drilling in soft formation and air DTH hammer in rock drilling, DTH Hammer is applied in rock drilling, slag is discharged by air pressure and the offstage efficiency is ten times than traditional rotary drilling.
1. The drilling rig can use air DTH Hammer drilling and mud drilling. Â Â
2. Centralized control console is suitable for each manipulation and control. Rapid pulling and lifting reduce the auxiliary time and enhance the work efficiency.
3. The truck chassis adopts the 8X4 special crane chassis of brand Sino truck How o and the main drive system, the transfer case, gearbox, double-winch unit, mud pump, turntable, drilling tower, feed system are set up on the chassis.
4. It's a hydraulic rotary drilling rig with directional circulation. It is equipped with BW450/2A mud pump which adopts the slurry as the washing fluid and can drill on clay, sand and rock if it is equipped with suitable drilling bit.
5. The power of drilling rig comes from a Cummins engine, 112kw Cummins engine drives the large displacement high pressure plunger pump and it is characterized by powerful dynamic and stable performance.
Specification                                                                               Â
General | |||
1 |
Geology drilled |
 | All kinds |
2 |
Drilling Type |
 | DTH & Mud Rotary |
3 |
Drill system and operation |
 | Hydraulic |
4 |
Hole Diameter |
mm |
Φ105-Φ350 |
5 |
Hole Depth |
m |
300 |
6 |
Rotation Torque |
Nm |
4500Â Â Â 1st Gear |
8000Â Â 2nd Ger | |||
7 |
Rotation Speed |
rpm |
0-80Â Â Â 1st Gear |
0-160Â Â 2nd Ger | |||
8 |
Drill pipe diameter |
mm |
89,102,114 |
9 |
Drill pipe length |
mm |
2500/4000 |
10 |
Axial pressure |
T |
85KN |
11 |
 Max. Lifting force |
N |
4000 |
12 |
Max. Feed Speed |
M/min |
18 |
13 |
 Max. Lifting Height |
m |
8 |
14 |
Feed Stroke |
mm |
3400 |
Winch | |||
15 |
 Max. Lifting force |
T |
20 |
16 |
Lifting force of Main winch(Optional) |
T |
4 |
17 |
Lifting force of hoist |
T |
1.5 |
18 |
Length of steel wire rope(tool winch) |
m |
100 |
19 |
Lifting height of tool winch |
m |
8 |
Engine | |||
20 |
Diesel Engine type |
CUMMINS |
|
21 |
Rated Horse power |
 Kw |
112 |
22 |
 Electrical System |
V |
24 |
Compressor required | |||
23 |
 Compressor Type |
Rotary Screw/Movable |
|
24 |
Pressure Required |
Mpa |
1.05-4.5 |
25 |
Air consumption |
m³/min |
16-60 |
Truck | |||
26 |
Manufacturer |
 | SINOTRUCK HOWO |
27 |
Model |
 | ZZ1257M5841W |
28 |
Engine |
 | WD615.62 |
29 |
Rated Horse power |
kw |
196 |
30 |
Discharge Standard |
 | EU-2 |
31 |
Drive type |
 | 2*8 |
32 |
Max.Speed |
Km/h |
102.9 |
33 |
Steering wheel |
 | left/right(Optional) |
Mud Pump | |||
34 |
Type |
 | Hydraulic |
35 |
Model |
 | BW450 |
36 |
Stroke |
mm |
110 |
37 |
Displacement |
L/Min |
450 |
38 |
Discharge pressure (Mpa) |
Mpa |
2-3 |
39 |
Suction tube diameter |
mm |
89 |
40 |
Discharge pipe diameter |
mm |
51 |
41 |
Liner Diameter |
mm |
80 |
Dimension | |||
42 |
Net Weight |
T |
22 |
43 |
 Shipping Length |
mm |
10600 |
44 |
Shipping Width |
mm |
2400 |
45 |
Shipping Height |
mm |
3050 |
46 |
 Working size(L*W*H) |
mm |
11000*2480*7147 |
Service                                                                               Â
In our after sales service system, We establish perfect control system strictly according to ISO-9000 series, in this system, technology date and problem solve solution and preventive measures will be provided in any maintain project, all the spare parts will be used in new OEM products with installation instructions, packing list, manufacturer's instruction, qualification and Warranty certificate.
We provide "one equipment & one case, endless service, namely the after sales service begin from the order confirmation, last for the working life of the equipment.
JKCS300
Application                                                                               Â
JKCS300 Multi-functional truck mounted water well drilling rig is an efficient, multi-function full hydraulic water well drilling rig. It is high efficiency because of having a larger torque of the turntable and is mainly used for water well in industry and agriculture, national defense building foundation, geological exploration,geothermic well and other foundation working, it is popular at home and abroad.
JKCS300 truck mounted drilling rig can drilling in all kinds formations by mud drilling in soft formation and air DTH hammer in rock drilling, DTH Hammer is applied in rock drilling, slag is discharged by air pressure and the offstage efficiency is ten times than traditional rotary drilling.
1. The drilling rig can use air DTH Hammer drilling and mud drilling. Â Â
2. Centralized control console is suitable for each manipulation and control. Rapid pulling and lifting reduce the auxiliary time and enhance the work efficiency.
3. The truck chassis adopts the 8X4 special crane chassis of brand Sino truck How o and the main drive system, the transfer case, gearbox, double-winch unit, mud pump, turntable, drilling tower, feed system are set up on the chassis.
4. It's a hydraulic rotary drilling rig with directional circulation. It is equipped with BW450/2A mud pump which adopts the slurry as the washing fluid and can drill on clay, sand and rock if it is equipped with suitable drilling bit.
5. The power of drilling rig comes from a Cummins engine, 112kw Cummins engine drives the large displacement high pressure plunger pump and it is characterized by powerful dynamic and stable performance.
Specification                                                                               Â
General | |||
1 |
Geology drilled |
 | All kinds |
2 |
Drilling Type |
 | DTH & Mud Rotary |
3 |
Drill system and operation |
 | Hydraulic |
4 |
Hole Diameter |
mm |
Φ105-Φ350 |
5 |
Hole Depth |
m |
300 |
6 |
Rotation Torque |
Nm |
4500Â Â Â 1st Gear |
8000Â Â 2nd Ger | |||
7 |
Rotation Speed |
rpm |
0-80Â Â Â 1st Gear |
0-160Â Â 2nd Ger | |||
8 |
Drill pipe diameter |
mm |
89,102,114 |
9 |
Drill pipe length |
mm |
2500/4000 |
10 |
Axial pressure |
T |
85KN |
11 |
 Max. Lifting force |
N |
4000 |
12 |
Max. Feed Speed |
M/min |
18 |
13 |
 Max. Lifting Height |
m |
8 |
14 |
Feed Stroke |
mm |
3400 |
Winch | |||
15 |
 Max. Lifting force |
T |
20 |
16 |
Lifting force of Main winch(Optional) |
T |
4 |
17 |
Lifting force of hoist |
T |
1.5 |
18 |
Length of steel wire rope(tool winch) |
m |
100 |
19 |
Lifting height of tool winch |
m |
8 |
Engine | |||
20 |
Diesel Engine type |
CUMMINS |
|
21 |
Rated Horse power |
 Kw |
112 |
22 |
 Electrical System |
V |
24 |
Compressor required | |||
23 |
 Compressor Type |
Rotary Screw/Movable |
|
24 |
Pressure Required |
Mpa |
1.05-4.5 |
25 |
Air consumption |
m³/min |
16-60 |
Truck | |||
26 |
Manufacturer |
 | SINOTRUCK HOWO |
27 |
Model |
 | ZZ1257M5841W |
28 |
Engine |
 | WD615.62 |
29 |
Rated Horse power |
kw |
196 |
30 |
Discharge Standard |
 | EU-2 |
31 |
Drive type |
 | 2*8 |
32 |
Max.Speed |
Km/h |
102.9 |
33 |
Steering wheel |
 | left/right(Optional) |
Mud Pump | |||
34 |
Type |
 | Hydraulic |
35 |
Model |
 | BW450 |
36 |
Stroke |
mm |
110 |
37 |
Displacement |
L/Min |
450 |
38 |
Discharge pressure (Mpa) |
Mpa |
2-3 |
39 |
Suction tube diameter |
mm |
89 |
40 |
Discharge pipe diameter |
mm |
51 |
41 |
Liner Diameter |
mm |
80 |
Dimension | |||
42 |
Net Weight |
T |
22 |
43 |
 Shipping Length |
mm |
10600 |
44 |
Shipping Width |
mm |
2400 |
45 |
Shipping Height |
mm |
3050 |
46 |
 Working size(L*W*H) |
mm |
11000*2480*7147 |
Service                                                                               Â
In our after sales service system, We establish perfect control system strictly according to ISO-9000 series, in this system, technology date and problem solve solution and preventive measures will be provided in any maintain project, all the spare parts will be used in new OEM products with installation instructions, packing list, manufacturer's instruction, qualification and Warranty certificate.
We provide "one equipment & one case, endless service, namely the after sales service begin from the order confirmation, last for the working life of the equipment.
Others 2. JAPAN truck parts, Mazda Parts of Air Filter 17801-35020, China Others 2. JAPAN truck parts
Mingzhi Auto Parts Co., Ltd. , http://www.cz-autoparts.com