China Professional Inverter Portable Welder Plasma Cutter

Model NO.: TIG-200A
Condition: New
Model Number: TIG-250A
Dimensions: 420*160*290mm
Power(W): 6.8kw
Input Capacity: 6.8kw
Duty Cycle: 60%(40ºC)
Usage: Welding
Efficiency: 85%
Warranty: One Year
Voltage: Single Phase380V±10%
Trademark: ZLRC
Transport Package: Carton Box or According to Customer Request
Specification: TIG-200A
Origin: China
HS Code: 8515290000
Model NO.: TIG-200A
Condition: New
Model Number: TIG-250A
Dimensions: 420*160*290mm
Power(W): 6.8kw
Input Capacity: 6.8kw
Duty Cycle: 60%(40ºC)
Usage: Welding
Efficiency: 85%
Warranty: One Year
Voltage: Single Phase380V±10%
Trademark: ZLRC
Transport Package: Carton Box or According to Customer Request
Specification: TIG-200A
Origin: China
HS Code: 8515290000
China Professional Inverter Portable Welder Plasma Cutter
 
♥ Welding: Inverter DC hand arc welding dual-use;
♥ Use: widely used instruments, decoration, hardware, small  parts, maintenance, etc.;
♥ Advanced inverter technology: Inverter frequency up to 100KHz, conversion

rate of 85%, no-load loss, using non-adjustable,easy to use, easy to carry, reliable and economical and durable;
♥ Precise control system: PWM Pulse Width Modulator, closed loop control

 system to ensure the machine is stable;
♥ Excellent welding performance:

1, gas adjustable delay 0-10S, save gas and  reduce costs;
2, high-frequency booster circuit arc and arc,  igniting a high success rate, good spot  synchronization;
♥ Weldable materials: stainless steel, low carbon steel, high strength steel and Cr-Mo steel, copper, titanium;
♥ Improve the protection system:undervoltage, overvoltage, overheating,

  over current, overload, phase auto-protection to ensure welding safety,reliability and durability;
♥ Excellent reliability
The AC current can get a very good clearance, and DC current can get a deeper penetration. Use the MIX TIG we can get anexcellent Arc Concentration, can be carried out the excellent welding performance from thin to thick plate.
1) Nice weld appearance, deep penetration.
2) Excellet Arc Concentration.
3) Substantially reduce the electrode consumption.
Technical parameter:
Item No: TIG-250A
Voltage: 380V±10%
Input Capacity: 6.8KW
Frequency: 50/60HZ
No-load Voltage: 68V
Current Arrange: 10-250A
Duty Cycle: 60%
Efficiency: 85%
Class of Insulation: F
Applied welding Rod: 1.0-3.2mm
Case protection Degree: IP21
Power Factor(cos φ): 0.85
Weight: 8.4
Dimension: 42x16x29CM

Standard Accessory:

China Professional Inverter Portable Welder Plasma Cutter


Factory picture:

China Professional Inverter Portable Welder Plasma Cutter
China Professional Inverter Portable Welder Plasma Cutter
China Professional Inverter Portable Welder Plasma Cutter

Our company 

BEIJING ZLRC Enviromental Protection Equipment Co., ltd mainly foucs on welder,mixer,all kinds of  saw,
angle grinder , air grinder,welding equipment, hardware and electrical equipment, building decoration materials, welding equipment leasing, and so on. And FRP products and FRP related machine manufacture and export.Our products include  pipe production line, FRP tank production line, FRP pultrusion machines, frp grating machines, FRP rebar machine, SMC presser,FRP winding machine. Our products includes full range of valves, flanges, watermeter,casting fittings and other industrial hardware upon your request.We wre a very strong team.There are all kinds of products.There are what you need.

Packaging & Shipping
Every piece will be  packed in a small packing of  box or cartons which depend on the requirment.


China Professional Inverter Portable Welder Plasma Cutter

FAQ

Q1:HOW LONG CAN I GET THE FEEDBACKS AFTER WE SENT THE INQUIRY?
We will reply you within 12 hours in working day.

 

Q2: ARE YOU A DIRECT MANUFACTURER OR TRADING COMPANY ?

We have our own factory and international sales department. We produce and sell all by ourselves.

 

Q3: WHAT'S THE PAYMENT TERM?

For mass production goods, you need to pay 30% deposit before production and 70% balance against copy of documents.

The most common way is by T/T. Paypal.

 

Q4:HOW TO GUARANTEE THE QUALITY AND AFTER-SALES SERVICE OF YOUR GOODS?

1,Strict detection during production.

2,Strict sampling inspection on products before shipment and intact product packaging are ensured.

3,Follow up and adopt customers' feedbacks in a timely manner after sales.


Q5:WHAT IS YOUR WARRANTY TERM?
Our company offer 1% free spare parts to FCL order.There is a 12months warranty for our export products from the date of the shipment.If warranty has run out,our customer should pay for the replacement parts.


Q6:CAN I USE MY OWN LOGO AND DESIGN ON PRODUCTS?
YES, OEM is welcomed.


Q7:HOW LONG IS THE DELIVERY TIME?
A:2-7 days for the sample order.
B:30-40 days for LCL or FCL order depend on order quantity.

 

Q8: CAN I CHECK THE QUALITY OF GOODS BEFORE DELIVERY?

A:Yes, you can come to our factory by yourself or ask colleagues from your Chinese office or even ask a third party inspection company to check the quality of goods before delivery.

B:We also can provide free professional inspection service and will send professional inspection report to you before shipping.


If you have another question, pls feel free to contact us as below:

BEIJINGZLRC ENVIRONMENTAL PROTECTION EQUIPMENT CO.,LTD
Add:VIP Eastern Courtyard ,Building 7 ,Hanwei International,Fengtai District,Beijing,China
Tel:
86-10-87587386
Fax:+86-10-67536885
China Professional Inverter Portable Welder Plasma Cutter
 
♥ Welding: Inverter DC hand arc welding dual-use;
♥ Use: widely used instruments, decoration, hardware, small  parts, maintenance, etc.;
♥ Advanced inverter technology: Inverter frequency up to 100KHz, conversion

rate of 85%, no-load loss, using non-adjustable,easy to use, easy to carry, reliable and economical and durable;
♥ Precise control system: PWM Pulse Width Modulator, closed loop control

 system to ensure the machine is stable;
♥ Excellent welding performance:

1, gas adjustable delay 0-10S, save gas and  reduce costs;
2, high-frequency booster circuit arc and arc,  igniting a high success rate, good spot  synchronization;
♥ Weldable materials: stainless steel, low carbon steel, high strength steel and Cr-Mo steel, copper, titanium;
♥ Improve the protection system:undervoltage, overvoltage, overheating,

  over current, overload, phase auto-protection to ensure welding safety,reliability and durability;
♥ Excellent reliability
The AC current can get a very good clearance, and DC current can get a deeper penetration. Use the MIX TIG we can get anexcellent Arc Concentration, can be carried out the excellent welding performance from thin to thick plate.
1) Nice weld appearance, deep penetration.
2) Excellet Arc Concentration.
3) Substantially reduce the electrode consumption.
Technical parameter:
Item No: TIG-250A
Voltage: 380V±10%
Input Capacity: 6.8KW
Frequency: 50/60HZ
No-load Voltage: 68V
Current Arrange: 10-250A
Duty Cycle: 60%
Efficiency: 85%
Class of Insulation: F
Applied welding Rod: 1.0-3.2mm
Case protection Degree: IP21
Power Factor(cos φ): 0.85
Weight: 8.4
Dimension: 42x16x29CM

Standard Accessory:

China Professional Inverter Portable Welder Plasma Cutter


Factory picture:

China Professional Inverter Portable Welder Plasma Cutter
China Professional Inverter Portable Welder Plasma Cutter
China Professional Inverter Portable Welder Plasma Cutter

Our company 

BEIJING ZLRC Enviromental Protection Equipment Co., ltd mainly foucs on welder,mixer,all kinds of  saw,
angle grinder , air grinder,welding equipment, hardware and electrical equipment, building decoration materials, welding equipment leasing, and so on. And FRP products and FRP related machine manufacture and export.Our products include  pipe production line, FRP tank production line, FRP pultrusion machines, frp grating machines, FRP rebar machine, SMC presser,FRP winding machine. Our products includes full range of valves, flanges, watermeter,casting fittings and other industrial hardware upon your request.We wre a very strong team.There are all kinds of products.There are what you need.

Packaging & Shipping
Every piece will be  packed in a small packing of  box or cartons which depend on the requirment.


China Professional Inverter Portable Welder Plasma Cutter

FAQ

Q1:HOW LONG CAN I GET THE FEEDBACKS AFTER WE SENT THE INQUIRY?
We will reply you within 12 hours in working day.

 

Q2: ARE YOU A DIRECT MANUFACTURER OR TRADING COMPANY ?

We have our own factory and international sales department. We produce and sell all by ourselves.

 

Q3: WHAT'S THE PAYMENT TERM?

For mass production goods, you need to pay 30% deposit before production and 70% balance against copy of documents.

The most common way is by T/T. Paypal.

 

Q4:HOW TO GUARANTEE THE QUALITY AND AFTER-SALES SERVICE OF YOUR GOODS?

1,Strict detection during production.

2,Strict sampling inspection on products before shipment and intact product packaging are ensured.

3,Follow up and adopt customers' feedbacks in a timely manner after sales.


Q5:WHAT IS YOUR WARRANTY TERM?
Our company offer 1% free spare parts to FCL order.There is a 12months warranty for our export products from the date of the shipment.If warranty has run out,our customer should pay for the replacement parts.


Q6:CAN I USE MY OWN LOGO AND DESIGN ON PRODUCTS?
YES, OEM is welcomed.


Q7:HOW LONG IS THE DELIVERY TIME?
A:2-7 days for the sample order.
B:30-40 days for LCL or FCL order depend on order quantity.

 

Q8: CAN I CHECK THE QUALITY OF GOODS BEFORE DELIVERY?

A:Yes, you can come to our factory by yourself or ask colleagues from your Chinese office or even ask a third party inspection company to check the quality of goods before delivery.

B:We also can provide free professional inspection service and will send professional inspection report to you before shipping.


If you have another question, pls feel free to contact us as below:

BEIJINGZLRC ENVIRONMENTAL PROTECTION EQUIPMENT CO.,LTD
Add:VIP Eastern Courtyard ,Building 7 ,Hanwei International,Fengtai District,Beijing,China
Tel:
86-10-87587386
Fax:+86-10-67536885

Laser Distance Measure is a very convenient tool for various types of applications in industries, construction and house decoration. Laser Distance Meter is a very useful device which gives accurate measurement of distance, area and volume especially in large areas such as rooms, apartments, buildings, real estates, factories, warehouses, infrastructures, gardens, roads, and many other applications requiring accurate results for distance , area and volume measurement.

Trade your heavy tape measure for laser rangefinder, which let you simply take measurements with one hand. No matter your job, the Laser Rangefinder will help you measure much farther, with greater accuracy and in more situations, saving you money and time. 

Specification:

Product Model:

JX40

Accuracy:

±1.5mm (0.06 inch)

Measuring Unit:

metre/inch/feet

Measuring Range:

0.03~40m (0.01 to 131 ft)

Measuring Time:

0.1~4 seconds

Laser Class:

Class II

Laser Type:

635nm, <1mW

Waterproof & Dustproof :

IP54

Auto Laser Off:

60 seconds

Automatic Power-off:

480 seconds(8 minutes)

Lighting:

white LED

Datum Option:

Can choose Front edge or end piece edge as datum

Battery Status:

Y

Signal Strength Display:

Y

Lcd Display:

2 inch large screen

Display illumination and multi-line display:

Max 2 displays

Data Memory:

Y (allow 20 values)

Backlight display:

Y

Continuous Measurement:

Y

Min/max Measurement:

Y

Addition/Subtraction(Distance/Area/Volume): 

Y

Area/Volume/Pythagoras Measurement:

Y

Battery Type:

AAA alkaline battery(2*1.5v )

Weight:

about 80g 

Dimensions(L*W*H):

4*2*11.5cm

Auto correction and error report technology:

Y

Operating Temperature:

0-40 â„ƒ(32-104 ℉ )

Storage Temperature:

-20~60 ℃  (-4~140 ℉)

Laser Distance Meter

Laser Distance Meter,Laser Distance Measure,Laser Rangefinder,Laser Distance Gauge

Chengdu JRT Meter Technology Co., Ltd , https://www.jrt-measure.com