30206 Taper Wheel Bearing Taper Roller Bearing

 Product Features
Single-row tapered roller bearing for supporting radial loads and axial loads in one direction
Chrome steel for durability and resistance to deformity under heavy loads
Open on both sides for lubricating in place
Static load rating of 41,500 newtons and dynamic load rating of 44,800 newtons
This 30206 tapered roller wheel bearing is made of chrome steel and is open on both sides. It has a 30 mm inside diameter, a 62 mm outside diameter, and a 17.25 mm depth. The single-row bearing supports radial loads and axial loads in one direction. The races are made of chrome steel for durability and resistance to deformity under heavy loads. The bearing is open on both sides for lubricating in place. The static load rating is 41,500 newtons and the dynamic load rating is 44,800 newtons. The maximum speed with grease lubrication is 53,000 revolutions per minute (rpm). This tapered roller bearing is used in applications such as vehicles, construction equipment, and agricultural machinery, among others.

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.
   Product Features
Single-row tapered roller bearing for supporting radial loads and axial loads in one direction
Chrome steel for durability and resistance to deformity under heavy loads
Open on both sides for lubricating in place
Static load rating of 41,500 newtons and dynamic load rating of 44,800 newtons
This 30206 tapered roller wheel bearing is made of chrome steel and is open on both sides. It has a 30 mm inside diameter, a 62 mm outside diameter, and a 17.25 mm depth. The single-row bearing supports radial loads and axial loads in one direction. The races are made of chrome steel for durability and resistance to deformity under heavy loads. The bearing is open on both sides for lubricating in place. The static load rating is 41,500 newtons and the dynamic load rating is 44,800 newtons. The maximum speed with grease lubrication is 53,000 revolutions per minute (rpm). This tapered roller bearing is used in applications such as vehicles, construction equipment, and agricultural machinery, among others.

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.
 

1) Fgd Pump restricting parts adopt the advanced flow simulation technology to guarantee the reliable pump design and the high operating efficiency.
2) The anticorrosion & antiwear metal and rubber materials which are specifically developed for FGD pumps have been proved by the practice that, they can ensure the long life pump operation.
Through adjusting the bearing components to change the impeller position in the pump chamber all time high efficient operation of the pump can be achieved. The pump is characterized by the back knock-down structure which is simple and advanced.
3) It is easy to maintain and repair and it is on need dismantling inlet and outlet water pipes. 
The containerized mechanical seal specially used for the desulphurization process is adopted and its operation is reliable.

we have developed a new kind of specialized material which possesses the duplex stainless steel's anti-corrosive property and the high chrome white iron's anti-abrasive property in FGD process.
In the rubber pump casing, impeller, suction cover/cover plate are all made of specialized anti-wear and anti-corrosive material: the material of front liner, back liner and back liner insert are natural rubber having excellent anti-corrosive property.
In metal pump casing, impeller, volute liner, suction plate and back plate are all made of specialized anti-wear and anti-corrosive material, the suction cover are made of ductile iron with rubber.

Fgd Power Plant Sump Pump and circulating desulphurization FGD pump are mainly used to handle slurry with smoke in absorption tower of electric power station, 
that is thermal power plant FGD (Flue Gas Desulfurization) Project.

Desulfuration FGD Pump

Fgd Pump,Fgd Sump Pump,Fgd Transfer Pump,Desulphurization Fgd Pump,Fgd Power Plant Sump Pump,Circulating Desulphurization Fgd Pump

Shijiazhuang Boda Industrial Pump Co., Ltd. , https://www.mineralslurrypump.com