Stainless Steel Tube Sheet /Tube Sheet/Forge Part/Flange

  • Model NO.: 304/304L
  • Type: Welding Flange
  • Structure: Round
  • Processing: Forging
  • Transport Package: Plywood Case/Wooden Case
  • Origin: China
  • Standard: ANSI, DIN, GB, JIS, GOST, BSW
  • Material: Stainless Steel
  • Manufacturing Way: Forging
  • Trademark: suzhougraceland
  • Specification: CE, SGS
  • HS Code: 73049200
Brief introduction
Tube Sheet
Standard: ANSI B16.5, ANSI B16.47 Series A & B, ANSI B16.48, API 605,
API 16D, API 17D, BS4504, BS3293, DN, AS, JIS

Material

Stainless Steel: ASTM A182 F304/304L, F316/316L,

F316H, F316Ti, F321, F44(UNS S31254)
Alloy Steel: ASTM A182 F1, F5/a, F9, F11, F12, F22, F91
Duplex&Super Duplex Steel: ASTM A182 F51/UNS S31803, F53/UNS S32750

F55/UNS S3260
Special Alloy Steel: Monel400, Inconel 600, Inconel 625, Inconel

800, Inconel 825, Inconel C276
Dimention Range: OD 300-2500mm/Height 50-800mm
Delivery condition: Rough machining or finish machining

 Other products you may like

Stainless Steel Tube Sheet /Tube Sheet/Forge Part/Flange


FAQ
Q1: What's the advantage of your company?
A: Our company specializes in trading for more than 13 years. We know how to solve any kinds of emergency accident during trading to give you a high quality and safety services . Choose the most suitable manufacture to satisfy your requirements is our goal. 

Q2: I do not have experience to purchase  from China before. How to start my first order?
A:  It is easy and simple. Please feel free to contact with us. Experienced team is ready to help you step by step.

Q3: Can I get some samples?
A: Yes, we're honored to offer you samples for quality check.

Q4:How to confirm the quality ?
A: Third party inspection is warmly welcome before shipment. We have cooperated with SGS,IEI, CCIC,TECHNICO,BV,FIDES,etc.If you require the previous release notice issued by them,we would like to send you before order. 

Q5: Is it possible to know how is my product going on without visiting your company?
   A: We will offer a detailed products schedule and send weekly reports with digital pictures and videos which show the machining progress.

Q6: What is the production cycle?
A: It varies a lot depending on product dimension,technical requirements and quantity. We always try to meet customers' requirement by adjusting workshop schedule.

Q7: What is your payment?
A: Normally, by T/T 30% down payment, 70% balance before shipment. 100% L/C at sight is also accepted by us. Besides, we have Kun Lun bank to receive Iranian payment. 


Contact Information
 
 
Mobile:   Nick   +8618906205113


 

China Cold Room Condensing Unit,Indoor Condensing Unit, 5 Hp Condensing Unit ,Compressor Condenser Unit, we offered that you can trust. Welcome to do business with us.

The compressor power is from 1hp to 30hp.It is designed as thin-wall type , which is suitable for both wall hanging and floor standing installation;All the fans are axial fans ,which is easy for installation and maintenance ,with stable operation and low noise.

Fully Enclosed Air-cooled Unit

Cold Room Condensing Unit,Indoor Condensing Unit,5 Hp Condensing Unit,Compressor Condenser Unit

Zhejiang Diya Refrigeration Equipment Co.,LTD. , https://www.diyarefrigeration.com