Electric Cabinet Roll Forming Machine
1 parts of equipment
  Â
The whole line includes  leveling,feeding/punching, forming ,cutting and so on
Â
The whole line consists of de-coiler system, punching system, forming system,cutting system,electrical control system ,etc
2,Parameter
Â
| Â No. |
 Name |
 unit |
 parameter |
 remark |
|
| Â 1 |
 Suitable raw materials |
 type |
 Mild steel, galvanized sheet |
||
|  Plate strength |
Map | ≥350 | |||
|  Plate thickness |
mm | 1.2~2.5 | |||
| 2 | Â specification |
mm |        See the picture |
||
| 3 | Â speed |
m/min | 6~8 | ||
| 4 |  Material of the roller |
 GCr15,Hardening treatment |
|||
| 5 |  drive type |
 Gear box |
|||
| 6 | Â power |
kw | Â About45 |
||
| 7 |  Electrical control system |
 PCL frequency control |
|||
| 8 | Â Size(lengthXÂ widthXheight) |
m | 35X4X3.9 | ||
Equipment structure:
This line is composed of auto-de-coiler , leveler and feeding section , continuous punching device, forming section, position and cutting device, collection table, the electric control system, etc.
Max. feeding width is 220mm
Diameter of the roller shaft: ¢50mm,material is 40Cr
 
Our expertise for your energy
The efficiency of any system powered by renewable energy depends to a large extent on whether the energy can be stored. Only then will it still be possible to use the power generated even if the wind is not blowing, the sun is not shining or there is no biogas available. Rittal has the right system solutions to meet these storage tasks, be it for a photovoltaic system in a private residence, or an industrial-scale solar farm.
  Â
Compact and effective:
- Wall-mounted enclosures and oor-standing enclosures with high protection categories and international approvals
- Congured with heavy-duty shelves and 482.6 mm (19) system technology
- Perfect, efficient climate control - with climate control components precisely tailored to your required output. From simple fan-and-lter units, to cooling units, to chillers with a cooling output of up to 450 kW.
Â
 Modular and exible:
- Bayed enclosure systems support exible, innite baying
- High protection category and international approvals
- UL-tested busbar systems
- Optimum climate control even at high heat losses
- Perfect integration into a standard container if required
 
 Â
Reliable distribution:
- ISV distribution enclosures for reliable power distribution at all building levels
- Design verication to IEC 61 439
- Choice of devices from many different manufacturers, including: ABB, Eaton, General Electric, Mitsubishi, Schneider Electric, Siemens and Terasaki
-
Â
The Style PVR pressure/Vacuum Relief Valve is a Sanitary Valve designed specifically for the brewing, beverage, food processing and pharmaceutical industries.
l Self-actuated operation.
l Relieves excess air or gas pressure.
l Relieves excess liquid pressure in the absence of air or gas blanketing.
l Designed to prevent vacuum formation that could cause the vessel to buckle.
l Body and all internal parts designed to operate after exposure to process fluids and withstand direct flushing and cleansing of sterilizing agents, caustics, water or steam.
l Allows complete drainage after operation and/or flushing and minimizes crevices which might trap contaminants or promote freezing in cold environments.
l All materials are corrosion resistant and all exposed surface finishes are controlled to enhance sanitary features.
1. Size: 1/2"- 6"
2. Material: SS304, SS316L
3. Standard: SMS,DIN,3A,IDF,ISO or according to customer request.
4. Connection: Butt-welded,clamped,threaded
5. Cartridge and body: Forge
6. Seal: Food Rubber
FAQ:
1.Are you a trader or manufactory?
We are a manufactory (Own Forging workshop and CNC machining workshop )
2.Can your products reach to FDA , CE and 3A requirements?
Yes, all of our material can reach to the requirements of FDA, ISO and 3A Certificate).
3.We can supply:
Sanitary Butterfly Valve, Sanitary Check Valve and Diaphragm Valves, as well as Various Tank Accessories: Sight Glass, Strainers/Filter, Cleaning Ball, And other Pipe Fittings , (Pipe Unions: SMS, DIN, IDF, RJT, 3A,DS; Fittings: Ferrule,Elbow, Tee, Reducer and all other Non-standrad fittings), each products are tested well by our strictly Quality Control System, and we also have excellent service to support you and promote your business.
4.Lead Time:
For large quantity, as usual, it can be sent out within 20-40 days.
Small parcel will be dispatched by DHL, FedEx, UPS OR TNT Courier.
Big cargo will be delivered by Air freight or By Sea.
5.Our Service:
About payment:
Payment methods: L/C, T/ T, Paypal,Western Union
6.About samples:
We can provide samples production and service. Usually 2 to 5 days, the sample can be sent to your hands. We will choose the shipping way as you required: By sea, by air or by express. Any question about samples, please contact us.
7.For OEM products:
We will finish the production within 20-40 days after payment has been confirmed.
About delivery and shipping:
We will choose the delivery way as you required: By sea, by air, by express ect. Save your cost is our mission.
8.Warranty:
Any question or problem will be respond within 12 hours.
9.Lifetime service:
Any problem happened to our product, we will do our best to help client to solve it, spare parts will be half price in lifetime.
10.Problem solve:
If you can't solve the problem in your local, please delivery the product to us, we will repair it and then back to you.
11.Quality control:
All the products are calibrated with real working condition, and tested before shipping as qualified product.
12.Purpose:Attitude is everything.
Tank Pressure Vacuum Relief Valve
Vacuum Relief Valve,Stainless Steel Relief Valves,Stainless Steel Valve,Pressure Relief Valve
Wenzhou Qili Fluid Equipment Co., Ltd. , https://www.qlssvalve.com