Pickup connection cable selection and wiring

The pickup can use a normal 4-wire telephone line, a Category 5 network twisted pair cable, a shielded/unshielded signal cable, and the like. Considering the complex construction environment, it is recommended to use a 0.5mm2 cross-section 3-core signal cable (commonly used 3Ã—0.5 RVVP cable).

There are two types of power supply for pickups:

1. Independent power supply (recommended power supply), the signal is transmitted with 2Ã—0.5 RVVP cable.

2, centralized power supply (concentrated power supply in the machine room), with 3 Ã— 0.5 RVVP core cable, respectively, power supply, audio signal positive, public ground. Shielded cables can be used in electromagnetic complex environments, and the shield is connected to the equipment ground at one end. That is, the shielding net at one end of the pickup (pickup) is suspended, and the shielding net of the device end is connected to the equipment ground (the casing). Note: When wiring, separate the wires, do not use the same cable slot with strong current such as AC, and try to stay away from strong electromagnetic interference equipment such as transformers and lamp rectifiers.

How to choose a power supply

When installing, consider the power efficiency and line loss. Try to use a power supply with a higher nominal value. The DC regulated power supply referred to here is a commonly known "line type transformer", which is generally composed of a power transformer, a rectifier diode, a filter capacitor, and an integrated voltage regulator. Try not to use a switching power supply, it can cause a lot of circuit noise! Many switching power supplies on the market have poor quality and a very large ripple factor, which can cause the pickup to hum.

What is a switching power supply? Simply put: the switching type DC stabilized power supply is an automatic regulated power supply composed of an electronic switch tube and an electronic switch oscillator. For example, a common desktop computer power supply is a switching power supply.

Double Girder gantry crane introduction

Double Girder Gantry Crane is heavy Gantry Crane with double girders, which is widely used for general purpose. double girder gantry crane are heavy duty crane, used at indoors and outdoors places where Overhead Crane runways are not practical. The lifting capacity of the double girder gantry crane is 5 to 500 tons. The working class of the gantry crane is A5 and A6. The main parameters of double girder gantry crane is as follow:

Product Type	MG
Lifting Capacity	5~500t
Span Length	12~35m
Working Class	A5, A6
Ambient Temperature	-25~40â„ƒ

Components of Double Girder Gantry Crane

The double girder gantry crane is mainly consisted of bridge, trolley, crane travelling mechanism, and electric system.

Double girder gantry crane drawing

Application of Double Girder Gantry Crane

Double girder gantry crane is usually used to open warehouse or along rail for general material handling and lifting work, such as, freight yard or dock, etc.

Advantages of Double Girder Gantry Crane

Advanced technology, delicate design, attractive appearance

Novel structure, wide span, high crane stability and reliability

Large loading capacity and high working efficiency

Flexible operation and easy maintenance

Standardization, generalization and serialization of the spare parts.

Features of Double Girder Gantry Crane

1. General features:

All the operation is conducted in the operating room.

Grab bucket, container spreader, and other special lifting devices can be equipped to do special material handling work.

Customized design based on your specific applications is available.

High efficient, with the work class high up to A5( Medium) and A6( Heavy).

Three control modes for your selection: cab control, remote control, floor control.

2. On main body:

Double welded box beams, with camber line meeting and beyond the national standards.

High steel degree, and high safety.

High quality carbon steel Q235B or Q345B.

Submerged arc automatic welding and nondestructive flaw detection is used.

10.9 high strength bolt is used to connect the end truck.

Separated driving systems is used which make the trinity drive possible, improving the safety and reliability.

Buffer block and orbital cleaning device are equipped to end beams.

3. On trolley part.

The trolley parts mainly includes motor, speed reducer, brake, coupling, wheels, and coiling blocks.

No asbestos brake pad and brake block insert use card outfit, safe and reliable;

Hard toothed surface speed reducer is equipped.

Separate drives are used for the trolley travelling.

High loading ability, stable traveling, and long service life.

Derailment prevention board is used to ensure safety.

Angle round box and buffer device is used.

Modular design is available to meet the various needs of customers.

4. Electric System

Module control speed, micro-speed and double speed are available.

Traveling and lifting smoothly.

Reasonable designed control box layout is easy to repair.

High protection class IP55.

Optional main power source.

All external cable lines are marked with number.

Safety smooth touch line, high conductivity, small pressure drop.

Light dead weight, and convenient to installation.

5. Protection devices

Shields and barriers are set to prevent the hook clashing the top.

Circuit self-test protection device is installed.

Rainproof devices are equipped with lifting mechanism, and electrical control box when the cranes is placed outdoors.

Anti-collision, sound and light alarm devices.

Rail clamps are equipped.

Lifting weight limitation, height limitation, rail clamping devices

Speeding protection, zero pressure protection, the lightning protection

6. Operation devices

Capsule driver room has open eye shot, linkage machine control and easy to operate.

Double block button or lever type lever, smooth operation and accurate.

Remote control, no need of professional driver

Following type or slide-independent, non-following suspension

Protection class IP65

Life of 500000 times; remote control, very easy;

With strong waterproof, fight broke performance

Double Girder Gantry Crane

Double Girder Gantry Crane,Electric Hoist Double Girder Crane,Container Handling Crane,Ship To Shore Container Crane

Shandong Lite Electrical Co.,Ltd , http://www.chinacranegroup.com