The high altitude of Qinghai 4500m, the ultra-low temperature of 30°C in Inner Mongolia, and the high temperature of 45°C in Laos... The test of Shanhe intelligent full hydraulic open-pit rock drilling rig is not much. Fortunately, he did not fear the challenge and successfully completed various construction tasks. It is particularly worth mentioning that during the construction of the Inner Mongolia Anlian Coal Mine, it was encountered by the local environmental protection bureau, the coal bureau and the central environmental protection inspection team. The ground and air (unmanned aerial photography) joint law enforcement, Shanhe intelligent open-air drilling The car is the only rig in the mine that meets environmental requirements without stopping work, and wins the leading international brands.
Recently, Shanhe Intelligent Full Hydraulic Open-pit Rock Drilling Rig Family has launched a new SWDH102S full hydraulic open-pit rock drilling rig. The high-reliability SWDH102S full-hydraulic open-air rock drilling rig has good adaptability to working conditions, especially with strong mode for high altitude, multi-crack, large aperture and other harsh working conditions; low operating cost and strong working ability, The two-stage high-efficiency dust removal system has no dust on the working surface and can easily meet the strict environmental protection requirements of all places.
SWDH102S full hydraulic open pit rock drilling rig
The following small series will unveil the mystery of the newly launched SWDH102S full hydraulic open-air rock drilling rig.
Low operating costs
The third generation of rock drill buffer system, more labor-saving tools
Rock drilling adaptive system with independent intellectual property rights, intelligently identify rock formation properties, prevent the occurrence of rods and air strikes, and have a longer life of the drills
Rock drill-air compressor-engine power is reasonably matched, fuel consumption is reduced by about 18%
Low operating costs
Wide adaptability of working conditions
Strong address adaptability: normal drilling economic mode, energy saving; high altitude, multiple cracks, large aperture and other severe conditions, strong mode, efficient
Job logic
Enhanced cooling system, no fear of high temperature climate; intelligent oil temperature control system, in the cold region can raise the oil temperature to a suitable working temperature in a short time
Enhanced cooling system
Enhanced walking system, large traction (125kN), high chassis (400mm off the ground), maximum walking speed 4.2km/h, better terrain adaptability
Strong working ability
10.3m3/min air volume +550J single impact energy +300Nm swing torque, easy to handle 115mm aperture
Strong working ability
Folding arm structure, large coverage area at one time
The maximum horizontal hole height is 6.5m, and the horizontal anchor hole can be used.
High reliability
Highly reliable core components (Atlas copco hydraulic rock drill, German GHH air compressor head, cummins engine, Walvoil multi-way valve, CASAPPA hydraulic pump)
High reliability core components
The product has experienced a high temperature of 45 °C in Laos, a high altitude of 4,500 m in Qinghai, and a low temperature test of 30 °C in Inner Mongolia.
Environmental protection
Two-stage high-efficiency dust removal system with no dust on the working surface. During the sudden inspection of the Wuhai Coal Bureau in Inner Mongolia, the Shanhe Intelligent Open Drilling Rig is the only rig in the mine that meets environmental requirements without stopping work.
SWDH102S full hydraulic open pit rock drilling rig
The high-reliability SWDH102S full-hydraulic open-air rock drilling rig has good adaptability to working conditions, especially with strong mode for high altitude, multiple cracks, large aperture and other harsh working conditions; low operating cost and strong working ability, according to actual measurement Compared with the traditional split-type DTH drill, the drilling efficiency doubles in the same caliber and geological conditions, and the fuel consumption is reduced by half. With two-stage high-efficiency dust removal system, the working surface has no dust, which can easily meet the strict environmental protection requirements of various places. (This article comes from Shanhe Intelligence)
Shenzhen city Jin Yuan Kang Industrial Co., Ltd is a professional company engaged in plastic vacuum coating processing, research and development of professional manufacturers, R & D, production, processing and service body, products related to mobile phone, computer peripheral accessories, such as digital camera, a design and manufacture of precision molds, precision injection molding, spraying, printing, Vacuum Plating, assembly manufacturing process.
The company has one hundred thousand dust-free workshop, advanced production lines. More than ten years experience in vacuum coating of professional and technical personnel. Has received a number of certification qualifications, standardized management, strict control of quality production. The company has a variety of coating technology, advanced equipment coating automatic line. With the continuous development of new vacuum plating products. It is one of the most potential vacuum electroplating factories in the Pearl River delta.
The company was founded in 1999, covers an area of 40000 square meters, the license system, integrated high-tech enterprises in accordance with the IS09001 international quality system certification and green environmental protection certification.
Shenzhen Jin Yuan Kang Industrial Co., Ltd. has a strong capital and scientific research strength, bringing together a group of high-quality, experienced professional talents. The company takes the market as the guidance, develops the high end environmental protection green product unceasingly, has won the general customer's credit and the praise.
The main products: high quality plastic electronic chassis paint, halogen-free UV series products, various grades of vacuum plating paint, high abrasion resistance, strong sense of rubber paint series, high performance hardware, paint, PU series, and all kinds of primer, the market share is very high.
Companies adhere to the "people-oriented, quality first, sincere service, beyond the self" concept, professional service team to do pre-sales consulting, sale, customer service service, take the customer as the center, and constantly develop new products, to meet customer and market needs. Jin Yuankang vacuum plating can be divided into several types: evaporation, sputtering and ion plating. They are used in vacuum conditions by distillation or sputtering in the plastic surface deposition of various metallic and non metallic films, by this way can get the surface coating is very thin, and has prominent advantages of high speed and good adhesion, functional coatings for high grade products in general, such as internal shielding use layer. Jin Yuankang vacuum plating a wide range of applications, such as ABS material, ABS+PC material, PC material products can be vacuum plating processing.
Vacuum Plating,Vacuum Splash Plating,Evaporation Plating,Plating Process
Jin Yuan Kang Industry Co., Ltd. , http://www.jykplating.com