The characteristics of membrane bioreactor (MBR) technology.
1, high removal rate of pollutant and water quality is good, can be directly reuse;
2, hydraulic retention time and sludge retention time complete separation;Â Â Â Â Â Â
3, microorganism with high concentration, big volume load, covers an area of the province;Â Â Â Â Â Â Â Â Â
4, long sludge age, less quantity of sludge;
5, good effect of denitrification;
6, strong ability to resist impact load;
7, the system is easy to realize automatic control, convenient operation and management.
Â
| Specification | |||
| Module Type | 6 | 10 | 15 |
| Module Length | 1020mm | 1523mm | 1523mm |
| Module Width | 534mm | 534mm | 534mm |
| Water Outlet Dia. | DN25 | DN25 | DN25 |
| Air Inlet Dia. | Nil/DN32 | Nil/DN32 | Nil/DN32 |
| Membrane Area | 6m2 | 10 m2 | 15 m2 |
| Dry Weight | 4kg | 6kg | 8kg |
| Wet Weight | 6kg | 10kg | 15kg |
| Basic Parameters | |||
| Housing Materials | ABS/UPVC | ABS/UPVC | ABS/UPVC |
| Hollow Fiber Materials | PVDF+special Nano | PVDF+special Nano | PVDF+special Nano |
| Pore Size | 0.1 micron | 0.1 micron | 0.1 micron |
| Fiber ID | 1.6mm | 1.6mm | 1.6mm |
| Fiber OD | 2.4mm | 2.4mm | 2.4mm |
| Effluent Turbidity | <1NTU | <1NTU | <1NTU |
| Effluent SS | <1 mg/L | <1 mg/L | <1 mg/L |
| Lifespan | 3-8Â years | 3-8Â years | 3-8Â years |
| Typical Working Conditions | |||
| Temperature  | 1-40 degree centigrade | 1-40 degree centigrade | 1-40 degree centigrade |
| pH | 2 to13 | 2 to13 | 2 to13 |
| Flow Rate | 2.0-2.5m3/d | 3.5-4.0m3/d | 6.0-6.5m3/d |
| Max Transmembrane Pressure | -0.03MPa | -0.03MPa | -0.03MPa |
| Water Production Way | Negative Pressure | Negative Pressure | Negative Pressure |
| Water Production Period | work 8 minutes, stop 2 minutes | work 8 minutes, stop 2 minutes | work 8 minutes, stop 2 minutes |
| Sterilization Chemical | sodium hypochlorite | sodium hypochlorite | sodium hypochlorite |
| Chemical Cleaning Period | 6-12 months | 6-12 months | 6-12 months |
| Cleaning Chemical | citric acid,sodium hydroxide | citric acid,sodium hydroxide | citric acid,sodium hydroxide |
The characteristics of membrane bioreactor (MBR) technology.
1, high removal rate of pollutant and water quality is good, can be directly reuse;
2, hydraulic retention time and sludge retention time complete separation;Â Â Â Â Â Â
3, microorganism with high concentration, big volume load, covers an area of the province;Â Â Â Â Â Â Â Â Â
4, long sludge age, less quantity of sludge;
5, good effect of denitrification;
6, strong ability to resist impact load;
7, the system is easy to realize automatic control, convenient operation and management.
Â
| Specification | |||
| Module Type | 6 | 10 | 15 |
| Module Length | 1020mm | 1523mm | 1523mm |
| Module Width | 534mm | 534mm | 534mm |
| Water Outlet Dia. | DN25 | DN25 | DN25 |
| Air Inlet Dia. | Nil/DN32 | Nil/DN32 | Nil/DN32 |
| Membrane Area | 6m2 | 10 m2 | 15 m2 |
| Dry Weight | 4kg | 6kg | 8kg |
| Wet Weight | 6kg | 10kg | 15kg |
| Basic Parameters | |||
| Housing Materials | ABS/UPVC | ABS/UPVC | ABS/UPVC |
| Hollow Fiber Materials | PVDF+special Nano | PVDF+special Nano | PVDF+special Nano |
| Pore Size | 0.1 micron | 0.1 micron | 0.1 micron |
| Fiber ID | 1.6mm | 1.6mm | 1.6mm |
| Fiber OD | 2.4mm | 2.4mm | 2.4mm |
| Effluent Turbidity | <1NTU | <1NTU | <1NTU |
| Effluent SS | <1 mg/L | <1 mg/L | <1 mg/L |
| Lifespan | 3-8Â years | 3-8Â years | 3-8Â years |
| Typical Working Conditions | |||
| Temperature  | 1-40 degree centigrade | 1-40 degree centigrade | 1-40 degree centigrade |
| pH | 2 to13 | 2 to13 | 2 to13 |
| Flow Rate | 2.0-2.5m3/d | 3.5-4.0m3/d | 6.0-6.5m3/d |
| Max Transmembrane Pressure | -0.03MPa | -0.03MPa | -0.03MPa |
| Water Production Way | Negative Pressure | Negative Pressure | Negative Pressure |
| Water Production Period | work 8 minutes, stop 2 minutes | work 8 minutes, stop 2 minutes | work 8 minutes, stop 2 minutes |
| Sterilization Chemical | sodium hypochlorite | sodium hypochlorite | sodium hypochlorite |
| Chemical Cleaning Period | 6-12 months | 6-12 months | 6-12 months |
| Cleaning Chemical | citric acid,sodium hydroxide | citric acid,sodium hydroxide | citric acid,sodium hydroxide |
Our team are focused on helping you develop higher performing, solutions for your products.Our expertise in high-performance metal replacement materials is unrivalled, coupled with the most comprehensive service offering you will find. Because of this and our exceptional service levels - we are confident you will not get a better cost-value proposition anywhere else in the world.we are leading plastics moulding specialist based in Coventry, south of Birmingham. We can provide a diverse range of plastics processing including: Compression moulding, Thermoset moulding, Thermoplastic Injection moulding, Transfer moulding and Composite Moulding.Plastic Solutions design and manufacture high quality, multi cavity injection and compression tooling for the electrical, electronic, automotive, medical and domestic markets.We offer a complete service from receipt of data right through to tool sampling and component inspection. We offer our customers a complete mould tool service, from prototype to fully hardened tools. If you require an initial prototype tool, to fine-tune your component design, we can produce an aluminium mould tool that allows you to assess and refine as required. With a fast turn-around on all prototype tooling, we can ensure your production schedule is maintained
Phone Cover Parts,Laptop Cover Parts,Iml Iphone Case Plastic Injection Mold,Iml Smartphone Cover Plastic Mold
Topwell Spring Development Ltd. , http://www.topwelldesign.com