ISO5660-1 Electrical Lab Instrument Universal Cone Shape Calorimeter Heat Test/Testing Equipment
1. Product Description
Simulating the material in a fire environment, the burning performance is used to assess the flame resistance.
The test control system consists of a temperature control system, calorimeter radiation tester, signal acquisition system, computer system, and a circuit system with a reasonable test system design.
An automatic stop safety system is included; if an emergency occurs, the machine will receive the signal and stop working.
Convenient operation and test data storage are also features of this equipment.
2. Standards
AS/NZS3837 and ISO5660-1
3. Technical Parameters
Â
| Power supply | AC220V±10%, 50Hz or 60Hz |
| Cone heater | Rated power: 5000W; Rated voltage: 230W; Output heat: 100kW/m²; Normal test mode is horizontal use (also can choose vertical test mode for vertical sample testing) |
| Temperature control system | PID temperature control, using 3 thermocouples to measure the temperature radiation cone, diameter is 1mm |
| Matching | With one test sample fixture (horizontal) |
| Gas exhaust system | Composed by fans, hoods, fan intake and exhaust pipes, and orifice flowmeter |
| Gas exhaust flow range | 0.012m³/s–0.035m³/s |
| Containing gas sampling system including | ring sampler, sampling pumps, filters, cold trap, gas drainage, water filters, and COâ‚‚ filter (optional) |
| With ignition system | 10kV spark generator (with safety protection device) |
Device structure and basic instructions:
| 1. Power regulator modules, PID temperature control module, air flow circuit control module, mechanical rotating module, human machine interface module, RS485 interface communication module, ARM signal processing module (pressure, temperature, flow, etc.), and programmable logic controller; |
| 2. PC communicates with the programmable controller through the RS485 interface to carry out data transmission and motion control. |
| 3. The PID temperature control module is connected to the power adjustment module, controlled by the programmable controller to regulate the thermostat. |
| 4. The signal acquisition processing circuit module is connected to the air volume control module, and the programmable logic controller calculates the output to smartly regulate the preset wind speed. |
| 5. The mechanical rotating module is connected to the programmable controller I/O port to control the rotation mechanism at the off state. |
| 6. The heating device in the heat release rate test analysis system combines thermal radiation sensors, oxygen, carbon dioxide, carbon monoxide analyzers, smoke density meters, and can perform uniform heat flux radiation on square test samples, thus achieving analysis of the material's heat release rate and obtaining a stable concentration of the test sample gas stream. |
Test software system:
| 1. The test control system consists of a temperature sampling control system, heat radiation tester, signal acquisition systems, computer systems, and a rational design of testing and sampling circuits. |
| 2. When the system detects a security signal, it will provide real-time feedback and automatically shut down, taking emergency safety measures. |
| 3. Signals generated by thermocouples can be transmitted through a temperature transmitter or directly to a recorder or computer. During the test, average temperature and single-point temperature can be displayed in real time. |
| 4. Easily implement the test project start, test process control, test parameter setup, all kinds of test data from sensors are sent to the computer, after automatic calculation and post-processing, they can be stored or printed as graphs. The software can be automatically programmed based on the temperature curve, recording furnace, furnace pressure, and test sample back temperature data. |
| 5. The system provides query functions. It can automatically store the number of test samples and temperature curves and data in the database within the system. Users can enter the sample number, test date, and other information for inquiry. |
| 6. Computer, laser printer (optional), and software systems. |
Test data include:
| 1. Heat release rate |
| 2. Ignition time |
| 3. Critical ignition heat |
| 4. Mass loss rate |
| 5. Smoke production loss rate |
Main configuration:
| 1. Imported water-cooled heat flux meter (optional matching) |
| 2. Cooling water temperature range: 10~30°C |
| 3. Cooling water flow >10L/hour |
| 4. Test range kW/m²: 100 kW/m² |
| 5. Reaction time <250ms (63%) |
| 6. Security alarm system (temperature overheat alarm, gas leak alarm, and leakage protection) |
Smoke measurement system parameters:
| 1. Detector chromaticity standard accuracy ±5%, output linearity (transmittance) <3%, absolute transmittance <1% |
| 2. Source: quartz bulb 100W/DC12V |
| 3. Device can provide (12.0 ±0.1)V regulated power supply |
| 4. Output impedance of smoke density test cells and dustproof tube <100Ω |
| 5. Light source and receiver placed at the top middle position between both sides of the exhaust pipe, not in direct contact with sealed windows, allowing light beam to pass through the fireproof windows to test the gas exhaust smoke density. |
| 6. Photocell mounted at one end of the tube (175 ±10) mm, the other end is the dustproof window |
| 7. Automatic calibration, adjust flux of zero (0%) and full-scale (100%); equipped with a set of standard filters |
| 8. Curve can be displayed on the computer |
4. Advantages
Core Competence
Customized ServicesÂ
To fulfill diverse client needs, we have extensive experience in research and flexible production.
Standard MasteryÂ
Extensive experience in customized business and understanding of each standard.
Thorough ServicesÂ
We serve with gratitude, professionalism, and honor, offering long-term value-added services through our own independent service branch.
Experienced R&D TeamÂ
Extensive R&D experience in mechanics, electronics, optics, thermology, IT technology, and customer service.
Overall MatchingÂ
Solutions provider for laboratories based on standards or functional requirements.
Our Customers
5. Certificates
6. Foreign Friends Visiting
7. Related Products
8. Company Profile
Guangzhou Sunho Testing Equipment Co., Ltd is a company integrating design, research, manufacturing, sales, and after-sales service, belonging to a high-tech enterprise.
Sunho has extensive R&D experience in safety performance testing, electromechanical properties testing, fireproof and flame retardant performance testing, waterproof performance testing, and life testing for household electrical appliances, electronic and electrical products, electrical accessories, building components and materials, wire and cable, IT computers and communications, children's toys, textiles, power simulation loads, and capacitors.
We also manufacture testing equipment for various products, sampling laboratories, and automated detection systems.
With a nationally recognized testing instrumentation production license, we offer over 1000 different product types.
9. Packaging & Shipping
Packaging: Wooden Box
Shipping: Ocean
Transport Port: Guangzhou or Shenzhen Port or Customer's Required
10. Payment & Delivery
Payment: T/T, MoneyGram, PayPal, Western Union
Delivery: 10-40 days after deposit received.
11. FAQ
1) Why choose us?
Customized Services: To meet diverse client needs, we have research experience and flexible production capabilities.
Standard Mastery: Extensive experience in customized business and understanding of each standard.
Thorough Services: We provide long-term value-added services with a grateful, professional, and honorable attitude through our own service branch.
Experienced R&D Team: Extensive R&D experience in mechanics, electronics, optics, thermology, IT technology, and customer service.
Overall Matching: A solutions provider for laboratories based on standards or function requirements.
Guangzhou Sunho Testing Equipment Co., Ltd has been engaged in testing equipment for over 10 years, known for quality and competitive pricing, and belongs to a high-tech enterprise. We always pursue perfection with you.
2) What kind of corporation are you?
We are a manufacturer and trader of testing machines in China.
3) What is your delivery time?
Normally, it takes 10-40 days depending on the port of unloading.
12. Contacts
Mr David    Mobile Phone: +86 18218458603    Â
Miss Kwai  Mobile Phone: +86 18122277847
Tel: 86-20-89224225Â Â Â 86-20-84282978
Fax: 86-20-39939307
Postcode: 511430
Website: http://www.sunhotest.com/
Address: NO 101 First Floor Block F, Shibei Industrial Park, Shibei Industrial Avenue, Dashi Street, Panyu, Guangzhou, China
EMT Pipe Series,Electrical Conduit Elbow,Elbow 90 Tube Polished Tubing, Pipe and Tube Elbows
Jiangsu Kinson Conduit Industry Co.,LTD , https://www.jskinsontube.com