Model NO.: EPS sandwich panel forming machine
Product Name: EPS Sandwich Panel Forming Machine
Trademark: HX
Transport Package: EPS Sandwich Panel Forming Machine Is Nude
Specification: EPS sandwich panel forming machine
Origin: China
HS Code: 84552210
EPS sandwich panel forming machine
1.The Character of the EPS sandwich panel forming machine
1, Light weight: less than 24KG per square meter weight, can fully reduce the structural cost
2, Heat insulation: the composite board commonly used insulation materials, rock wool, glass fiber cotton, polystyrene, polyurethane and so on, low thermal conductivity, with good insulation effect.
3, Fire prevention: color steel composite core board of the surface material and insulation material for non flammable or refractory material, can fully meet the fire code requirements.
4, Environmental protection, noise: the composite board sound insulation strength of up to 40-50 decibels, is very effective sound insulation materials.
5, Plasticity: profiled steel plate can be arbitrarily cut, to meet the needs of special design.
2.The parameter of the EPS sandwich panel forming machine
3.The EPS sandwich panel forming machine details
4.The Components of EPS sandwich panel forming machine
(1) Manual Decoiler   (Max.Capacity:5T   Coil Inner-Diameter: 508mm)
(2)Roll-Forming M/CÂ (Just for your reference, will make the machine as your drawing)
(3)Cutting Mechanism
It adopts hydraulic motor drive and automatic location to decide the dimension and cut the target products.
(4) Hydraulic System
Match equipment: a set of hydraulic tank , a set of hydraulic oil pump, two hydraulic pipes and two sets of electromagnetism valves.
Hydraulic pump power: 4KWÂ
(5)Computer control cabinet :
1). Screen: DELTA screen from Taiwan
2) PLC: DELTA
3). Automatic length measurementÂ
4). Automatic quantity measurementÂ
5).Computer is used to control length and quantity. Machine will automatically cut to length and stop when required quantity is achievedÂ
(6)Counter
One counter gauges length, pulses, and decides length
(7)Output table (3M one set)
Other related roll forming machines
1.Different types roof profile drawing forming machine ;
2.Curve roof roll forming machine ;Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 3.Ridge cap roll forming machine ;
4.Floor deck roll forming machine ;Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 5.Rain gutter roll forming machine ;
6.Down pipe roll forming machine ;Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 7.Highway guardrail roll forming machine ;
8.Roller shutter door forming machine ;Â Â Â Â Â Â Â Â Â Â 9.Door frame roll forming machine ;
10.CZU purlin roll forming machine ;Â Â Â Â Â Â Â Â Â Â Â Â Â 11.Light keel roll forming machine ;
12.Slitting machine (lines);Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 13.Shearing/bending machine ;
14.Decoiler(Hydraulic decoiler ,electric decoiler and manual decoils) and so on .
5.Our service for EPS sandwich panel forming machine
1.We have professional team to make different kinds of roll forming machines for our customers, from designing, processing,assembling, debugging, delivery.
2.we can send our engineer to your site and do the training for your men. you just only bear the cost for our engineer's air ticket,visa,accormadation,food and transpotaion in your country.
3.You can send your men to our factory. we will teach them how to operate the machine without training charges.
4.Actually theres another cheap and easy way to choose. Every machine leave our factory with one book of operation manual. You can read through the manaul first ,and get familiar with the machine. Then we can get a video call,and teach you on-line  how to operate the machine.
5.Apart from above training course,we also provide 1Â year warranty for all the easily broken part of the machine for free and whole-life technical service support.
If there is any problems happened to the machine, we will provide solution at once.
Hope we could establish win-win business relations in the soon future!
6.FAQ for the EPS sandwich panel forming machine
Â
Q:How is this machine's service life?
A:In the normal maintenance,the service life at least 8Â years.
Â
Q:How to maintenance?
A:If using frequently,best coating lubricant on the chain and two ends of the shaft every month,replace the hydraulic oil every 1-2 years.
Â
Q:What can you do if the machine broken?
A:Our machine's warranty period is 1Â year,if the broken parts can't repair,we can free send the new parts replace the broken parts to you except the solenoid valve,the solenoid valve you must pay the express cost yourself.if after warranty period,we can through negotiationfor to solve the problems,and we supply the technical support for the whole life of the equipment.
Â
Q:Can you be responsible for transport?
A:Yes,please tell me the destination port or address.we have rich experience in transport.
Â
Q:Mr.Alan,can you make the machine according to my design or proto type?
A: Yes. We have an experienced team for working out the most suitable design and production plan for the machine that you are going to book with us.
Â
Q:How many workers operate this machine to manufacture?
A:Only 1-2 worker.
Â
Q:Can you supply the raw materials?
A:Yes,we can supply the galvanized steel coil,galvalume steel coil,color steel coil,and aluminum coil.
7.Contact us
  Any need and questions for EPS sandwich panel forming machine,please don't hesitate to contact us .Urgent inquiry ,you can call me or send me whatsApp messages .(Mob:0086-18920411229).Looking forward to you join us .
1, Light weight: less than 24KG per square meter weight, can fully reduce the structural cost
2, Heat insulation: the composite board commonly used insulation materials, rock wool, glass fiber cotton, polystyrene, polyurethane and so on, low thermal conductivity, with good insulation effect.
3, Fire prevention: color steel composite core board of the surface material and insulation material for non flammable or refractory material, can fully meet the fire code requirements.
4, Environmental protection, noise: the composite board sound insulation strength of up to 40-50 decibels, is very effective sound insulation materials.
5, Plasticity: profiled steel plate can be arbitrarily cut, to meet the needs of special design.
2.The parameter of the EPS sandwich panel forming machine
| Item | 980 EPS sandwich panel forming machine |
| Processes and components | Un-coiler-Roll forming machine-Feeding device-Composit forming machine-Sheet cutting device-Receiving table |
| Main Specification | |
| Suitable to process | Steel plate,EPS |
| Feeding width for roof | 1200mm |
| Feeding width for wall | 1000mm |
| Formed width | 980mm |
| Thickness | 40-320mm |
| Forming machine | 13 rows |
| Dimensions | Uncoiler |
| Forming machine:8500*1520*1500mm(Length*Width*Height) | |
| Feeding device:5.1m in length | |
| Composit forming machine:6000*2230*2400m(Length *Width*Height) | |
| EPS sandwich panel forming machine table:6m | |
| Requirement of workshop | 40m*7m*6m(Length*Width*Height) |
| Power | 3KW |
| Productivity | 4-5m/min |
| Voltage | 380VÂ Â 50-60Hz, 3Â phase |
| Packing | nude, with waterproof cloth and stow-wood. The computer controlled cabinet is packed with waterproof cloth and box. The seller should guarantee equipments will be moisture-proof,anticorrosive, and will not be damaged during transportation. |
| Payment Term | 30% Deposit by T/T , 70% balance paid after inspection before delivery by T/T |
| Delivery Time | The Seller guarantees the equipment will be ready for shipment within 20-30 working days after receipt of deposit from the Buyer. |
| Service | We could send the technician to your country to fix the machine if you need. |
| Loading | one 40ft open top container and one 40ft ordinary container to hold |
| The price valid time | 1 month |
| Warranty | one year |
4.The Components of EPS sandwich panel forming machine
(1) Manual Decoiler   (Max.Capacity:5T   Coil Inner-Diameter: 508mm)
(2)Roll-Forming M/CÂ (Just for your reference, will make the machine as your drawing)
(3)Cutting Mechanism
It adopts hydraulic motor drive and automatic location to decide the dimension and cut the target products.
(4) Hydraulic System
Match equipment: a set of hydraulic tank , a set of hydraulic oil pump, two hydraulic pipes and two sets of electromagnetism valves.
Hydraulic pump power: 4KWÂ
(5)Computer control cabinet :
1). Screen: DELTA screen from Taiwan
2) PLC: DELTA
3). Automatic length measurementÂ
4). Automatic quantity measurementÂ
5).Computer is used to control length and quantity. Machine will automatically cut to length and stop when required quantity is achievedÂ
(6)Counter
One counter gauges length, pulses, and decides length
(7)Output table (3M one set)
Other related roll forming machines
1.Different types roof profile drawing forming machine ;
2.Curve roof roll forming machine ;Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 3.Ridge cap roll forming machine ;
4.Floor deck roll forming machine ;Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 5.Rain gutter roll forming machine ;
6.Down pipe roll forming machine ;Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 7.Highway guardrail roll forming machine ;
8.Roller shutter door forming machine ;Â Â Â Â Â Â Â Â Â Â 9.Door frame roll forming machine ;
10.CZU purlin roll forming machine ;Â Â Â Â Â Â Â Â Â Â Â Â Â 11.Light keel roll forming machine ;
12.Slitting machine (lines);Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 13.Shearing/bending machine ;
14.Decoiler(Hydraulic decoiler ,electric decoiler and manual decoils) and so on .
5.Our service for EPS sandwich panel forming machine
1.We have professional team to make different kinds of roll forming machines for our customers, from designing, processing,assembling, debugging, delivery.
2.we can send our engineer to your site and do the training for your men. you just only bear the cost for our engineer's air ticket,visa,accormadation,food and transpotaion in your country.
3.You can send your men to our factory. we will teach them how to operate the machine without training charges.
4.Actually theres another cheap and easy way to choose. Every machine leave our factory with one book of operation manual. You can read through the manaul first ,and get familiar with the machine. Then we can get a video call,and teach you on-line  how to operate the machine.
5.Apart from above training course,we also provide 1Â year warranty for all the easily broken part of the machine for free and whole-life technical service support.
If there is any problems happened to the machine, we will provide solution at once.
Hope we could establish win-win business relations in the soon future!
6.FAQ for the EPS sandwich panel forming machine
Â
Q:How is this machine's service life?
A:In the normal maintenance,the service life at least 8Â years.
Â
Q:How to maintenance?
A:If using frequently,best coating lubricant on the chain and two ends of the shaft every month,replace the hydraulic oil every 1-2 years.
Â
Q:What can you do if the machine broken?
A:Our machine's warranty period is 1Â year,if the broken parts can't repair,we can free send the new parts replace the broken parts to you except the solenoid valve,the solenoid valve you must pay the express cost yourself.if after warranty period,we can through negotiationfor to solve the problems,and we supply the technical support for the whole life of the equipment.
Â
Q:Can you be responsible for transport?
A:Yes,please tell me the destination port or address.we have rich experience in transport.
Â
Q:Mr.Alan,can you make the machine according to my design or proto type?
A: Yes. We have an experienced team for working out the most suitable design and production plan for the machine that you are going to book with us.
Â
Q:How many workers operate this machine to manufacture?
A:Only 1-2 worker.
Â
Q:Can you supply the raw materials?
A:Yes,we can supply the galvanized steel coil,galvalume steel coil,color steel coil,and aluminum coil.
7.Contact us
  Any need and questions for EPS sandwich panel forming machine,please don't hesitate to contact us .Urgent inquiry ,you can call me or send me whatsApp messages .(Mob:0086-18920411229).Looking forward to you join us .
| Tianjin Haixing Industrial Group Co.,Ltd | |
| Website | www.roll-forming-machine-china.com |
| Mob | 008618920411229 |
| Â | Â |
| Â | Â |
| Contact person | Alice Jiang |
| Main products | Roof roll forming machine; Glazed tile roll forming machine; Gutter roll forming machine; rain pipe roll forming machine; Floor decking roll forming machine; CZ purlin roll forming machine; Shutter door roll forming machine; Door frame roll forming machine; Container sheet roll forming machine; corrugated sheet machine; Hydraulic decoiler; Double layer roll forming machine; Crimping machine; Curve machine; Sandwich panel production line; Trapezoidal roof sheet machine... |
ECO FRIENDLY & BPA FREE: Made of High-density polyethylene (or HDPE) material, these biodegradable grocery bags are safer for the environment than traditional plastic bags. Our bags have been tested and proven in accordance with ASTM D5511 & D5526 to biodegrade in 202 days compared to a regular plastic bag that can take approximately 30 years to decompose.
LONG LASTING BAGS WITH STURDY HANDLES: Donu2019t worry about clinging bags, leaks or spills with these durable eco-friendly plastic biodegradable bags with handles to easily grip. They are heat and cold resistant, making them perfect for supermarkets and restaurants serving hot or cold foods. These bags will last a long time and serve multiple purposes as a shopping bag or Trash Bag.
Produce Bags,Reusable Produce Bags,Produce Mesh Bag,Shopping Produce Bags
METEOR INTERNATIONAL IMPORT EXPORT S.R.L. , https://www.made--in--china.com